Use and Care Guide

Figure 7 Figure 8
Securing the fan motor assembly to the mounting bracket
6
Loosen two (RR) away from the mounting bracket (A) 1/3 length.mounting bracket screws
□
Attach the canopy (B) key shape hole to the mounting bracket (A) (RR) previously loosen and clockwise rotate the Canopy. screws
□
Tighten the (RR) . mounting bracket screws
□ Align the key shape hole on the canopy (B) with canopy cover (C). Push up the canopy cover (C) until the screw (RR) heads engage
to the slots on the canopy cover (C), and rotate the canopy cover (C) until it is attached to the bottom of the canopy (B) properly.
RR
□
10
Assembly - Hanging the Fan (continued)