Use and Care Guide

Figure 10
Figure 9
NOTE: The blade with "this side up" label must face upwards, otherwise it cannot be installed correctly.
Install the blades
7
11
Assembly - Hanging the Fan (continued)
□
□
□
Remove all blade screws from the rotary plate (SS) of fan-motor assembly (G).
Insert the blades (K) into holes of the rotary plate (SS) in place.
Reattach all blade screws through the blade washers and tighten all screws to make sure the blades (K)
is secure.
SS
SS
HOMEDEPOT.CA/Hubspace
Please contact 1-877-592-5233 for further assistance.