Use and Care Guide

Figure 15
Figure 16
Figure 17
Figure 17
LL or JJ
cradle 1
plate 2
N
KK
13
Assembly - Hanging the Fan (continued)
□ Rotate the glass shade (G) clockwise until it is secure.
Install the glass shade Install the remote bracket
11
10
HOMEDEPOT.CA/Hubspace
Please contact 1-877-592-5233 for further assistance.
Wall
II
□
□
□
Using the remote bracket as a guide, mark the two holes plate 2
locations.
Drill the two holes at the marked locations and install two
anchors (II) in each of the marked locations.
Insert screw (LL) into anchor and tighten each screw.
□
Insert screw (KK) into and tighten each screw.cradle 1
Install scenarios 1: Direct to Wall via screws and dry wall anchors
□
Insert screw (JJ) into the Toggle or Paddle Switch screw hole
and tighten each screw.
□
Insert screw (KK) into and tighten each screw.cradle 1
Install scenarios 2 : Over Toggle or Paddle Switch via screws