Use and Care Guide

Figure 6
Figure 5
WARNING:
WARNING:
Follow the steps below to connect the fan to your house
supply wires. Secure the wire nuts (AA) supplied with your
fan by wrapping the connections with electrical tape.
□ Connect the black (120V line voltage) wire from the outlet
box to the black wire from the receiver (L).
□ Connect the white (120V neutral voltage) wire from the
outlet box to the white wire from the receiver (L).
□ Connect the green (120V neutral voltage) wire from the
outlet to the green wires from the hanger ball (D),
mounting bracket (A) and receiver (L).
□ Secure the wire connection with a plastic wire nut
( A) provided with the electrical hardware. A
□ After connecting the wires, spread them apart so that
the green and white wires are on one side of the outlet
To avoid possible electrical shock, ensure the
electricity is turned off at the circuit breaker or main fuse box
before wiring.
Check to see that all connections are tight,
including the ground, and that no bare wire is visible at the
wire nuts, except for the ground wire.
□ Insert the receiver (L) into the mouting bracket (A ) with
□ Plug one lead wire of light (with 3P small male connector)
and one lead wire of fan (with 3P big male connector) to
HOMEDEPOT.CA/Hubspace
5
Making the electrical connections
the flat side of the receiver (K) facing the ceiling.
the female connector on the receiver (L).
box.
9
Assembly - Hanging the Fan (continued)
Please contact 1-877-592-5233 for further assistance.