Installation Instructions

ManualsBrandsLEEDARSON LIGHTING ManualsElectronicsFan&Light Switch

LZW36 | Fan & Light Switch

Red Si

www.inovelli.com/lzw36/setup contact@inovelli.com page 1

Thank You.

Thank you for taking the chance on us. We are truly humbled to be a part of your smart home journey and know that out of the

many companies out there, you trusted us to make your life simpler and we don’t take that for granted. Our mission is to provide

the best products, with the best customer support, at the best prices. Sure, every company says that... but we’d like to think

we’re dierent. Why? Well, because we have our own smart homes, with our own desires to make our life simpler through home

automation. We wake up every day to lights turning on to dierent colors based on the weather, coee automatically brewing

before we leave for work, and the thermostat changing based on our schedules. We take our nerdiness seriously by engaging in

online groups and design our products around community suggestions and needs. We don’t pretend to be a multi-billion dollar

corporation worried about shareholders and bottom line. We’re ok with being the little guy. The underdog, looking out for the best

interests of people like us... the everyday smart home enthusiast who is passionate about moving the industry forward and we

wouldn’t have it any other way. So again, from the bottom of our hearts, thank you for trusting us.

Z-Wave SmartStart

This device supports Z-Wave’s new SmartStart feature. Please do not throw out the card within the box that has your unique

QR Code with your DSK (Device Speciﬁc Key). This QR Code can also be found on the back of the switch (metal plate) and box.

HUB Installation Instructions.

All HUB’s are dierent, so why should your installation instructions be the same? Below you’ll ﬁnd a QR Code to speciﬁc

instructions for your HUB (NOTE: If you don’t see your HUB, please scan the, “Other” QR Code). As you can imagine, it’s hard to

keep written instructions up to date with all the HUB/App changes, so the most recent instructions will be on the site. However,

if you’re a manual guy/gal, we get it, please see Page 7 for more details! If ever you run into any issues, please reach out to us at:

contact@inovelli.com.

Table of Contents: Page:

How Does the Fan & Light Switch Work? 2

About Z-Wave & Range Estimator Tool 3

Z-Wave Distance Worksheet & Best Practices for Installation 4

Wiring Disclaimers 5

Getting to Know Your Switch (LZW36) 6

Switch & Module Wiring (Neutral Required) 7

Installation Instructions (Canopy Module and In-Wall Switch) 7-8

Local Conﬁguration Mode 8

Switch Parameters 9

FCC, Warranty and Z-Wave Information 10

Project Hurricane 11

SmartThings Wink Hubitat Other

inovelli.com/lzw36/setup/smartthings inovelli.com/lzw36/setup/wink inovelli.com/lzw36/setup/hubitat inovelli.com/lzw36/setup/other

Summary of content (11 pages)

PAGE 1
LZW36 | Fan & Light Switch Red Series Thank You. Thank you for taking the chance on us. We are truly humbled to be a part of your smart home journey and know that out of the many companies out there, you trusted us to make your life simpler and we don’t take that for granted. Our mission is to provide the best products, with the best customer support, at the best prices. Sure, every company says that... but we’d like to think we’re different.
PAGE 2
LZW36 | Fan & Light Switch Red Series Technology Behind the Fan & Light Switch There are two different wireless protocols that are used to make this fan & light switch. Z-Wave and RF. Z-Wave is what gives the switch remote (smart) control, whereas RF is what connects the switch to the module. In other words, your hub/gateway connects to your switch, where you can tell it to change the speed of the fan or the brightness of the lights.
PAGE 3
LZW36 | Fan & Light Switch Red Series Z-Wave Range Worksheet. Feel free to use the below worksheet to give an estimate on where you can put your Z-Wave Switch relative to your HUB (or other Z-Wave repeater). Below is an example of how to use the sheet, using, “Example 1” from Page 3. For the starting Distance, use 100m. Then look directly from your HUB to wherever you’d like to put the outlet and see what obstacles are in the way.
PAGE 4
LZW36 | Fan & Light Switch Red Series About Z-Wave. Z-Wave is an incredible technology. With it powering your home, you can choose from over 600 companies and 2100 products, all of which will work with each other. The more devices, the more stable the network. The purpose of this portion of the manual is to help you understand how Z-Wave works (in layman’s terms) as well as help you organize an efficient Z-Wave network, setting you up for success in the long run.
PAGE 5
LZW36 | Fan & Light Switch Red Series Wiring Disclaimers A quick note before we give out the wiring schematics. Please do not try installing this device if you are unsure of how electrical circuits operate within your home. As exciting as it is to have a smart switch installed, it can be dangerous and even life-threatening if you do not install this correctly. Please consult a qualified electrician if necessary as we are unable to give wiring advice outside of schematics.
PAGE 6
LZW36 | Fan & Light Switch Red Series Getting to Know Your LZW36 Fan Switch Now that you’re familiar with Z-Wave and how it works, it’s time to understand the basics of your new smart switch. For more advanced configurations, please see Pages 8-10. A. Light Dimmer (and Scene Control*): This button can be used to increase or decrease the dimness level on your light. Press (hold) up to increase brightness and press (hold) down to decrease the brightness.
PAGE 7
LZW36 | Fan & Light Switch Red Series Wiring Instructions: Neutral Wire Required (Quick Notes) Please note that you will need a neutral wire in order to install this switch. In addition, you will be connecting the Line/Hot to the Load. Here are some quick notes to read prior to installing your switch:  If you do not see your wiring diagram here, please check online as we will constantly update and add schematics to our site and also have a forum where you can help each other.
PAGE 8
LZW36 | Fan & Light Switch Red Series NOTE: If you’d like to verify if the switch is within range of your Z-Wave hub before installing the canopy module, feel free to turn the power back on. The switch should light up and run through a series of colors before finally turning blue. Once the switch LED bars are blue, hold down the top of Button A and Button B for 5 seconds and the switch LED’s will turn Green. Release the buttons and if the switch LED’s remain Green, then the switch is within Z-Wave range.
PAGE 9
LZW36 | Fan & Light Switch Red Series Switch Parameters Below you’ll find the various parameters associated with your switch. There are a ton of options for customization and as you can imagine, it’s hard to write out all the possibilities in a manual. Please use this as a guide, but also feel free to check out our site where we’ll give some specific examples using each parameter.
PAGE 10
LZW36 | Fan & Light Switch Z-Wave Command Classes 5E - COMMAND_CLASS_ZWAVEPLUS_INFO 55 - COMMAND_CLASS_TRANSPORT_SERVICE 98 - COMMAND_CLASS_SECURITY 9F - COMMAND_CLASS_SECURITY_2 6C - COMMAND_CLASS_SUPERVISION 26 - COMMAND_CLASS_SWITCH_MULTILEVEL 70 - COMMAND_CLASS_CONFIGURATION 85 - COMMAND_CLASS_ASSOCIATION 59 - COMMAND_CLASS_ASSOCIATION_GRP_INFO 86 - COMMAND_CLASS_VERSION 72 - COMMAND_CLASS_MANUFACTURER_SPECIFIC 5A - COMMAND_CLASS_DEVICE_RESET_LOCALLY 73 - COMMAND_CLASS_POWERLEVEL 75 - COMMAND_CLASS_PRO
PAGE 11
LZW36 | Fan & Light Switch Red Series Project Hurricane You may have noticed our signatures and project name on the inside of the box and wondered, “what is that all about?”. Well, great question! All of our products have a project name associated with them that means something to us and speaks directly to the device itself. It’s personality if you will. In addition to the project name, our signatures indicate that we’ve all signed off on the project.