Safety Information

ManualsBrandsLEEDARSON ManualsElectronicsMotion Sensor

LEEDARSON BLE Motion Sensor

Content:

1. In the box………………………………………………………………………………………………………………………………………..2

2. app set up……………………………………………………………………………………………………………………………………….2

3. Product introduction……………………………………………………………………………………………………………………….3

4. Product installation………………………………………………………………………………………………………………………… 3

5. Safety information……………………………………………………………………………………………………………………………5

6. Maintenance.. .......................................................................................................................................5

7. FCC compliance notice……………………………………………………………………………………………………………………..8

We build your success in IoT.

Summary of content (9 pages)

PAGE 1
We build your success in IoT. LEEDARSON BLE Motion Sensor Content: 1. In the box………………………………………………………………………………………………………………………………………..2 2. app set up……………………………………………………………………………………………………………………………………….2 3. Product introduction……………………………………………………………………………………………………………………….3 4. Product installation………………………………………………………………………………………………………………………… 3 5. Safety information……………………………………………………………………………………………………………………………5 6. Maintenance.. .............................................................................
PAGE 2
BLE Motion Sensor Quick Start Guide 1. In the box Motion sensor Screws 2. app set up Remove the plastic sheet from battery cabinet. It’s power on now.
PAGE 3
. Product Introduction The motion sensor is designed for using with scenes in home automation and security systems, integrate motion, light sensors to identify day or night mode for scenario application. The Motion Sensor lets you know when movement is detected in a certain area and can trigger different action (scenario) in response to that movement.
PAGE 4
② Installation position should be chosen at the area which the pass-by will be across, try to make the passby in the detection area ③ Do avoid installation near air-conditioner, electric fans, refrigerators, ovens or other places where temperature easy change. ④ In order not to affect the detecting result, there should be no object in front of the produces lens. ⑤ Building (such as the wall) will shorten the distance of wireless communication. ⑥ Recommend to install motion sensor on the wall 2.5~2.
PAGE 5
Install sensor with bracket Install on the corner Install on the cabinet Install on the wall Please mount sensor on the bracket to avoid anti-tamper notification. 5. Safety Information Battery Safety Information: • This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep away from babies and small children at all times.
PAGE 6
IMPORTANT: Do not expose to rain. Install the product at least 3 ft. from the oor for optimum performance. This alarm contains small parts and is not suitable for children. Periodically check the condition of the batteries. Disposal and Recycling Information: Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
PAGE 7
6. Maintenance ① How to reset a door/window sensor? Keep pressing the reset key about 3 seconds, then the LED indicator will start blinking quickly. Once release the key, the sensor will reset to factory setting and the LED indicator blinks once per second to search a new enabled network. ② How to join a door/window sensor? After the sensor is reset to the factory setting, the signal light blinks once per second and sensor starts searching an enabled network.
PAGE 8
Remove sensor from bracket (Fix bracket and move sensor up) Remove screw from battery cover Open battery cover, replace battery 7. FCC compliance notice FCC ID: (to be filled) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 9
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.