Safety Information

3
3. Product Introduction
The motion sensor is designed for using with scenes in home automation and security systems,
integrate motion, light sensors to identify day or night mode for scenario application. The Motion
Sensor lets you know when movement is detected in a certain area and can trigger different action
(scenario) in response to that movement.
Product main components and function overview:
Motion sensor Motion sensor Bracket Motion sensor Battery Battery
with bracket cover
① Reset : Press the reset button(inside battery cover) for 3 seconds then release to reset the sensor.
The sensor can be found if App or gateway open to search device.
② LED Indicator: If sensor has not been added to gateway or mobile phone, the LED will be blinking
about one time per second. The LED will be turned off when joined to gateway or mobile phone
successfully.
③ Anti-tamper：When the sensor is removed from the bracket, it can report tamper to gateway or
mobile phone.
4. Product Installation
The motion sensor can be mounted by screws or 3M adhesive tape, install it according to the following step:
① Choose the installation location on the wall, fix the bracket by screw or 3M adhesion tape on the wall.