Installation Instructions

3
① Reset : Press the reset button for 3 seconds then release the pin to reset the sensor. After the reset,
the sensor will be found by the App or the gateway when they search for the device.
② LED Indicator: If sensor has not been added to hub, the LED will be blinking about one time per
second. The LED will turn off when joined to gateway successfully.
③ Anti-Tamper switch: When the sensor is removed from the bracket, it can report tamper to
gateway.
Specification
Detection angle
80 degrees
Detection distance
8 meters / 26.25 feet
Pet immune
80 lbs (36 kgs)
Mounting height
6.23 ft. to 7.55 ft. (1.9m to 2.3m)
Light sensor
20 lux for day/night(bright/dark)
Protocol
Zigbee 3.0
Power source
Battery-powered
Battery type
CR123A X 1
Battery life
3 years
Anti-Tamper
YES
Low power alarm
YES
Certifications
CE/FCC