Installation Notice

4
 The ARIZE Water Leak “alarm” can be sent to ARIZE hub.
 The ARIZE Water Leak Sensor is designed to be a floor type sensor..
 The ARIZE Water Leak Sensor has a built-in LED indicator and an acoustic alarm.
 The ARIZE Water Leak Sensor has a low battery alarm to ARIZE hub.
4. Installation Notice
1. Install the detector in areas where there is a concern about possible water leaks, such as
bathrooms, basements, water heaters, under clogged drains, under old pipes, or in other areas of
your home that are prone to leaking. You can receive an instant alert.
2. Do not locate the detector in cabinets and other areas where the alarm sound cannot be heard.
3. Do not install in an area where it can come in contact with rain, oil smoke and steam from a
kitchen range.
4. Do not install the detector in submersed water.
5. If a pool of water forms, moisture must contact both leads to trigger an alert.
6. Installation Guide
1. The sensor will be in pairing status when power turns on for the first time. This will cause an
LED indicator light to flash once per second for 2 minutes. Use the Arize Installer Application to
scan this device. If sensor pairs successfully, the light will stop blinking and then stay on for
about 10 seconds.