INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS M1-2400 (MH 1270) CROSS HANDLE WALL-MOUNTED 3-HOLE BATH FILLER TRIM ONLY, TO SUIT R1-4035 ROUGH
Contents Dimensions 3 InstalLation Procedure 4 Parts List 6 Fault Finder 7 Safety Tips, Care and Maintenance 8 Guarantee 9 2
Dimensions 3 1/2" (88.6mm) 2 3" (77mm) (6 8m ) 11 /1 m 6" in Inches (& Millimetres) 8" (203mm) Ø2 3/8" 9 1/8" (232.5mm) 3 1/4" (83mm) (50mm) 1 15/16" Ø(60mm) Whilst every effort is made to ensure accuracy, design and dimensions are subject to change without notice as part of the company’s product development process.
Installation Procedure Steps 1-2 Lefroy Brooks always recommends that plumbing products be installed by a licensed professional. Shut off main water supply before installation. 1 2 1 Install the extension stem. 2 Install the escutcheons and handles.
Installation Procedure Steps 3-4 Lefroy Brooks always recommends that plumbing products be installed by a licensed professional. Shut off main water supply before installation. 3 4 3 Install the spout and fix it tightly with set screw. 4 After installing faucet, remove aerator and open the hot and cold supplies. Check for leaks. Turn on faucet handle for one minute to flush debris from faucet. Turn off the handle and re-assemble the aerator.
Parts List Exploded view 13 10 4 15 9 12 11 2 8 1 6 7 3 16 14 1 2 3 4 5 6 7 8 Aerator (500765) Spout (118507) Set screw (292598) Handle ( H ) (029685H) Adaptor (067773) Clip (012242) Canopy (018014) Adaptor (057507) 9 10 11 12 13 14 15 16 Screw (075043) Stem extension (110490) Escutcheon (071325) O-ring (004640N) O-ring (063030) Handle ( C ) (029685C) Set screw (008701) Allen Key (031000) 6
Fault Finder Fault Cause Rectification Drips from spout. Gasket is misfitted or damaged. Check for gasket placement. Aerator leaks or has an inconsistent water flow pattern. Aerator is dirty or misfitted. Unscrew the aerator to check rubber packing or replace the aerator.
Safety Tips, Care and Maintenance Safety Tips If you are soldering during faucet installation,remove cartridges, seats, gaskets and washers prior to applying flame, otherwise you will void the warranty. Cover drain openings to avoid losing small parts. When cutting or soldering pipe, use safety glasses to protect your eyes. Important Points Prior to beginning installation. turn off the cold and hot water lines and open the old faucet to release built-up pressure. Overtightening nuts may cause damage.
Guarantee Guarantee of Quality This product is guaranteed against faulty materials and workmanship for 12 months from date of purchase. For the guarantee to be valid, the unit must be installed by a competent person, in accordance with the instruction booklet. Any part found to be defective during the guarantee period, will (at our option) be repaired or replaced, free of charge, provided the unit has been installed, and properly used in accordance with the instruction booklet.
718-302-5292 www.lefroybrooks.com LEFROY BROOKS INC, 1828 TROUTMAN STREET, RIDGEWOOD, NY, 11385 TELEPHONE: 718-302-5292. FAX: 718-302-4177 The use of trademarks, product design and artwork is subject to licence or agreement with Christo A. Lefroy Brooks. The design registrations, trademark registrations and copyrights are protected by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs and dimensions is reserved.
