INSTALLATION INSTRUCTIONS M2-1031 WALL BATH SPOUT
Dimensions in Inches (& Millimetres) 0.67-1.22in [17-31mm] 1/2-14NPT 4.2in 107.7mm 3/4-14NPT 10.1in 255.8mm 9.5in 241.7mm 2.4in 60mm 1in 25.4mm Whilst every effort is made to ensure accuracy, design and dimensions are subject to change without notice as part of the company’s product development process.
What you need to know Tools: Maintenance Adjustable Wrench Groove Joint Pliers Hacksaw Phillips Screwdriver Spirit Level Your new bathroom faucet is designed for years of trouble-free performance. Safety Tips Important Points If you are soldering during faucet installation, remove cartridges, seats, gaskets and washers prior to applying flame, otherwise you will void the warranty. Prior to beginning installation.
Steps 1-2 Installation Procedure Lefroy Brooks always recommends that plumbing products be installed by a licensed professional. Shut off main water supply before installation. 7/8”-2 7/8” (23mm-73mm) 2 1 1 4 Install the fixing pipe to elbow located in the wall cavity. Wall surface 2 Make sure that the fixing pipe protruding out of the wall surface is between 7/8" ~ 2 7/8" (23mm ~ 73mm) after it is fixed.
For additional assistance or service call 718-302-5292 9am to 5pm EST Monday to Friday www.lefroybrooks.com LEFROY BROOKS INC, 1828 TROUTMAN STREET, RIDGEWOOD, NY 11385 TELEPHONE: 718-302-5292. FAX: 718-302-4177 The use of trademarks, product design and artwork is subject to license or agreement with Christo A. Lefroy Brooks. The design registrations, trademark registrations and copyrights are protected by law and the use or reproduction outside the terms of an agreement is prohibited.
Step 3 Installation Procedure Lefroy Brooks always recommends that plumbing products be installed by a licensed professional. Shut off main water supply before installation. Set screw 3 3 4 Install spout to the fixing pipe and fix it with set screw.
