user manual

3 8
SEEK 1/ 2 (only available during radio operation)
Seek function with the or button during radio operation.
You can select SEEK 1/ SEEK 2 by using the +/- button.
SEEK 1: Keep the or buttons pressed down and the radio will
stop at the next station that is detected.
SEEK 2: As long as the or buttons are pressed down the search
function will continue in the frequency band.
VOL LAST/VOL ADJ
You can select VOL LAST or VOL ADJ mode by using the +/- button.
VOL LAST: The radio switches on at the actual volume it had when
it was last switched off.
VOL ADJ: Using the + and - buttons you can pre-select a constant
switch-on volume.
4. POWER ON/OFF
Turn the device on by using any button except the OPEN and the REL
button on the front control panel; Press PWR button and hold for
approximate two seconds to turn power off.
5.6. LCD (Liquid Crystal Display)
7. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS
a) During RADIO mode:
press the or button briefly to tune a frequency manually.
Press the or button and hold for more than one second to start
the automatic search for a radio station with a strong signal level.
(See also the function SEEK 1/SEEK 2.)
b) During CD mode:
press the button briefly to play next track. Press the button
briefly to play the current track from the beginning of the current track.
Press the button twice continuously to play the previous track.
Press the or button hold to skip forward or backward.
8. BAND BUTTON
Press the BND button briefly to select the radio broadcasting band
you would hear.
9. MODE BUTTON
Press the MODE button to select the CD playback or radio mode.
10-15. PRESET STATION MEMORY AND TOP, INT, RPT, RDM BUTTONS
a) During radio mode:
Press the six buttons briefly directly selects a preset radio station.
If the six buttons are pressed for more than 2 seconds, the station
currently being listened to is memorized into the selected preset
button.