LEGACY ® LDVD35 OWNER’S MANUAL Mobile Video System • Multi-subtitle Languages Function • Multi-audio Languages Function • Multi-angle Function • Parental Control
Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance. FEATURES Compatible with PAL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recorded in either PAL or NTSC format. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.
CONTENTS Safety Information ........................................................................................4 Disc Notes .....................................................................................................5 Installation .....................................................................................................6 Electric Connection ......................................................................................7 Remote Control..........................................
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player V I D E O Note these scratches are not an indication of any problem with the player.
INSTALLATION CLASPER CLASPER TRANSPARENT GLASS COVER BOARD SCREWS LOCKED THE UNIT CORE Fig. 1 SCREW M5x25 SCREW M4x5 SCREW M4x5 3 1 3 2 1 4 2 Fig. 2 Note: 1. In Fig. 1, first remove the two screws that locket the unit core, then put the transparent glass cover board on the DVD unit, last embed four claspers into the holes to fix the cover board. 2. In Fig. 2, first attach the brackets on both sides of unit with screws (M4x5), and then install the unit with screws (M5x25). 3.
ELECTRIC CONNECTION DVD PLAYER DC 12V IN DC 12V OUT REMOTE A/V OUT DIGITAL AUDIO L/R VIDEO YELLOW VIDEO OUT RED AUDIO R OUT AC/DC ADAPTOR WHITE AUDIO L OUT (OPTIONAL) REMOTE CONTROL RECEIVER CIGARETTE LIGHTER 7
REMOTE CONTROL 1 10 2 3 11 12 4 13 6 14 5 15 7 16 8 17 9 1. 2. 3. 4. 5. 6. POWER 0-9 GOTO 7. SUBTITLE 8. 9. 10. 11. 12. SETUP TITLE DISPLAY REPEAT / / 13. SLOW 14. ENTER 15. AUDIO 16. ANGLE 17.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented indicated. 3. Close the cover Battery: Two AAA size battery. Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal reciver). Operation angle: About ± 30 degree in each the direction of the front of the IR mark.
BASIC OPERATION Stopping Play - Brief press the (Stop) button to stop the unit playback, when press the (Play) button it can continuous normal playback. - Press (Stop) button twice, it will stop the playback and go back to initial Track/Chapter. Return to normal playback, press once again. Repeat Press the REPEAT button to select repeat mode as follow. DVD: Press the REPEAT button to select repeat mode as follow. Rapid Forward/Rapid Reverse Press FF & REW during play.
BASIC OPERATION (2) Press DISPLAY for the second time: On-Screen Display Function Press the DISPLAY button during playback to display the contents of the current disc on the screen.
BASIC OPERATION CD: Press AUDIO during playback. It is possible to switch the sound between monaural and stereo sound. MONO LEFT MONO RIGHT Multi-angle Function (For DVD only) Press ANGLE during playback. Each time the button is pressed, number of the angle changes in sequential order. Notes: - The angle number is different according to the disc. - The function only work for discs having scenes recorded at different angles. - When no different angle are recorded will be display at screen left top corner.
BASIC OPERATION MP3 Disc Play MP3 disc is playing as the format of FOLDER. For example: SMART NAVI ROOT ROOT 0 MP3 MUSIC 1 SKY MP3 HEAR YOUR PLAY MODE FOLDER Use to select the item or folder, then press ENTER button. Pressing REPEAT button repeatedly can select three kinds of repeat play mode. REP-ONE: Play the same song over and over again. FOLDER REPEAT: Play all songs in the current directory in sequence, over and over again. FOLDER: Play all songs in the current directory once.
SETUP INITIAL SETUP GENERAL SETUP SETUP MENU --- MAIN PAGE --- GENERAL PAGE --- GENERAL SETUP TV DISPLAY NORMAL/PS SPEAKER SETUP PIC MODE NORMAL/LB AUDIO SETUP ANGLE MARK WIDE PREFERENCES OSD LANG CAPTIONS SCR SAVER EXIT SETUP 1. Press SETUP in the stop mode. (Press the stop button twice to ensure the player under STOP mode.) MAIN PAGE TV Screen 2. The initial SETUP menu is displayed. 4:3 Video Material Normal 3. Select the preferred item by using the / buttons.
SETUP --- GENERAL PAGE --- --- GENERAL PAGE --- TV DISPLAY TV DISPLAY PIC MODE AUTO PIC MODE ANGLE MARK HI-RES ANGLE MARK OSD LANG N-FLICKER OSD LANG CAPTIONS CAPTIONS SCR SAVER SCR SAVER MAIN PAGE MAIN PAGE PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on format on image or picture under noise affect. ENGLISH OSD LANG type setup Select the preferred OSD language by using the / buttons.
SETUP --- GENERAL PAGE --- AUDIO SETUP --- AUDIO SETUP --- TV DISPLAY PIC MODE AUDIO OUT ANALOG OP MODE SPDIF/RAW DYNAMIC SPDIF/PCM ANGLE MARK OSD LANG CAPTIONS LPCM OUTPUT SCR SAVER ON OFF MAIN PAGE SCR SAVER setup Select the SCR SAVER output ON/OFF. MAIN PAGE AUDIO OUT This is to activate the audio output from ANALOG mode to SPDIF/RAW mode to SPDIF/PCM mode.
SETUP --- AUDIO SETUP --- PREFERENCES SETUP --- PREFERENCES PAGE --- AUDIO OUT OP MODE FULL DYNAMIC 6/8 LPCM OUTPUT 4/8 TV TYPE AUTO AUDIO NTSC SUBTITLE PAL DISC MENU 2/8 PARENTAL OFF PASSWORD DEFAULTS SMART NAV MAIN PAGE MAIN PAGE TV type setup This player can play discs recorded in either PAL or NTSC format. Select NTSC format, when you connected to NTSC TV. Select PAL format, when you connected to PAL TV.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --- TV TYPE AUDIO TV TYPE 1G AUDIO 2 SUBTITLE 3 PG SUBTITLE ENGLISH DISC MENU 4 PG 13 DISC MENU FRENCH PARENTAL 5 PARENTAL SPANISH PASSWORD 6 PG-R PASSWORD CHINESE DEFAULTS 7 NC-17 DEFAULTS JAPANESE SMART NAV 8 ADULT SMART NAV OFF MAIN PAGE NO PARENTAL MAIN PAGE PARENTAL Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.
SETUP --- PREFERENCES PAGE --- DEFAULTS TABLE General Setup TV Display Normal/PS TV TYPE PIC Mode AUTO AUDIO Angle Mark ON OSD Language English SUBTITLE DISC MENU Captions OFF SCR Saver OFF PARENTAL Speaker Setup Downmix Stereo PASSWORD Audio Setup Audio Out Analog DEFAULTS OP Mode RESET Line Out Dynamic SMART NAV LPCM Output LPCM 96K MAIN PAGE Preferences TV Type DEFAULTS Select reset to become factory initial setting.
SPECIFICATIONS Supply Voltage Current Consumption Signal System Discs Played Audio Output Level Audio Signal Output Characteristics : : : : 12V DC (11V-15V), test voltage 14.4V, negative ground Less than 3A Compositive video 1.0Vp-p 75Ω (1) DVD-VIDEO Disc 5” (12 cm) single-sided, single-layer 5” (12 cm) single-sided, double-layer (2) Compact Disc (CD-DA, VIDEO CD) 5” (12cm) disc : 600Ω (2 ch 2.
