Instructions / Assembly

10
ASSEMBLY INSTRUCTIONS
9
10
9. Attach the three side panels (G) to the
heater using the (M3/16) screws (AA).
Note :
1. M3/16 screws from Step 3 unscrewed
from lower supports.
2.Do not cover the front side where
the control knob is.
10. Screw the knob (CC) onto the front panel
(I). Attach the panel to the heater by inserting
the two tabs into the slots on the base (J).
Hook the chain (which is preassembled
onto the front panel) into the hole in the front
of the control box. The chain will keep the
panel from falling forward while lighting
/operating your heater.
G
I
CC