Instructions / Assembly

10
A dented, rusted or damaged propane cylinder may be
hazardous and should be checked by your cylinder supplier.
Never use a propane cylinder with a damaged valve connection.
The propane cylinder must be constructed and marked in accordance
with the specifications for LP gas cylinders of the U.S. Department of
Transportation(DOT) or the standard for cylinders, spheres and tubes
for transportation of dangerous goods and commission, CAN/CSA-B339.
The cylinder must have a liste
d overf
illing prevention device.
The cylinder must have a connection device compatible with the
connection for the appliance.
The cylinder used must include a collar to protect the cylinder
valve.
Never connect an unregulated propane cylinder to the appliance.
Attach regulator to cylinder. Complete attachment. Install cylinder.
ASSEMBLY
Do not store a spare LP-gas cylinder under or near this appliance;
Never fill the cylinder beyond 80 percent full;
Place the dust cap on the cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on
the cylinder valve that is provided with the cylinder valve. Other type of caps or plugs may result in leakage of
propane.
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE
ONLY.
Do not sit or stand on this fire pit table.
Keep children away during assembly, as this item contains small parts which can be swallowed by
children.
Do not use indoors or inside any enclosure.
Retain the assembly instructions for future reference.
Installer – Please leave these instructions with the owner.