Instructions / Assembly

PROBLEM

POSSIBLE CAUSE

CORRECTIVE ACTION

Burner won’t light

Propane cylinder is empty Replace propane cylinder

Blockage in orifice Clear blockage

Control knob is not in ON position Turn control knob to ON

Burner flame is low

Gas pressure is low

Turn cylinder valve OFF and re-fill the

cylinder

Outdoor temperature is less than 40°F

and tank is less than ¼ full

Use a full cylinder

Control knob fully on Check burner and orifices for blockage

Carbon build-up Dirt or film on burner Clean burner

Thick black smoke Blockage in burner

Remove blockage and clean burner

inside and outside

TROUBLESHOOTING