Instructions / Assembly

1. Locate B/C/D and Door Panel with Door -F .

Align hole in all panels and insert M6x25 Bolts ( AA) ,

througn M6 Washer (BB) ,then insert Bolt /Washer through holes .

Loosely tighten with Wrench A (CC) .DO NOT OVERTIGHTEN AS

you will need to adjust the panels to ensure proper alignment

Hardware used

Hardware Used:

NOTE:

Right and Left Panels ( C/D) marked 1,2 should match the door panel with F marked 1,2

2. Attach Propane Tank Strap (HH) to the bottom plate as show in

Figure 2.

3. Turn the Door Knob, open the Door and attach the Bottom Plate (E)

to the assembled Side Panels/Door Panel using M6x25 Bolts (AA)

Note: Match bottle plate as 3-3,4-4

Hardware Used:

ASSEMBLY

M6x25 x 8

M6 Washer x 8

M6 Washer x 4

M6 x 25 Bolt x 4