Instructions / Assembly

4. Attach the table top ( A) to the assembled side panels . Align the holes
in the table top (A) with the holes
at the top of the assembled side Panels and insert M8 x16 Bolts through
M8 Washer ( GG ) and through holes . Tighten with Wrengh B ( HH )
Do not overtighten as you will need to adjust the holes to ensure
proper alignment .
5. Pour the Fire Glass ( II ) around the burner )
Hardware Used:
Note: The Control box on the burner Assembly should face towards the D panel with a hole
ASSEMBLY
DD
M8 x 16 Bolt x 4
EE Washer x 4
4
5
8
After complete assembling the fire pit ,please tight all the screws on the fire pit .