USER MANUAL PROFESSIONAL e-Screen FLEX 55” Full HD LCD touchscreen monitor Important: Please read this user manual thoroughly and completely before operating this monitor.
CONTENTS: 1 Important Safety Instructions Safety Precautions Installation (when installing the monitor, please follow the instructions in the manual) Use Cleaning 3 3 3 4 4 2 Warning For Use Use Exemptions 5 5 5 3 Features 5 4 Package Unpacking Contents of accessory bag 5 Installation Environmental state Power Input Power Interface Signal Source Input 6 6 6 7 7 7 7 7 6 Operating the Monitor The side controller of the monitor The Remote Control (RCU) Instructions Change The RCU Battery Di
1 Important Safety Instructions Before using the touch monitor, please read this user manual thoroughly to help protect against damage to your own and other people's property and ensure your own and other people personal safety. Installation Be sure to observe the following instructions. For your safety, be sure to observe the warnings located in this manual. For installation or adjustment, please follow this user manual instruction and refer all servicing to qualified service personnel.
Use Cleaning If you encounter a problem during installation, please contact your dealer for assistance. Don’t repair or open the monitor by yourself. Failure to do so may result in fire or electrical shock. Contact your dealer for inspection. If dust has collected on the power plug, removed the plug from the outlet and clean off the dust. Dust build-up may cause a fire. Protect and correctly use the power cord/plug. Don‘t press heavily on the power cord/plug. Don‘t step on the power cord/plug.
2 Warning For Use 3 Features Use High-resolution Full-HD 120Hz panel This monitor supports a 1920 x 1080 HDTV format and can display true 1.073G colors. Do not use this touch monitor on the ground. Transport the monitor upright with proper packaging. Avoid placing the monitor face up or down. Be careful not to bump to the monitor. Do not send a static (non moving) image this monitor, or it may cause image ‘burn-in’ or image retention.
4 Package Unpacking Contents of the Accessory Bag The e-Screen 55” is packed in a carton box and may be banded to 2 types of custom pallet depends on the number of units shipped. The e-Screen 55” is packed using cushions to protect the monitor during shipping. Before unpacking your monitor, prepare a stable, level, and clean surface near a wall outlet. Set the LCD Monitor box in an upright position and open from the top of the box before removing the top cushions.
5 Installation Environmental state Signal Source Input Operating temperature: 5˚C ~ 35˚C (Fahrenheit : 41˚F ~ 95˚F) Humidity : 85% RH (Max) Input Interface Name Power Input Power Cord The included power cord is used to connect the side controls of the LCD monitor and the wall outlet. Connect the power cord into main power of the monitor, “–” is power on, “” is power off.
6 Operating the monitor The side controller of the monitor The Remote Control (RCU) Instructions Input Interface No Function Input connector Description 1 Turns the monitor on and off 2 INFO Provides source and resolution information 3 VGA DVI HDMI 1 Selects the PC RGB source Selects the PC DVI source (55“) Selects the HDMI source 1 4 COMP 1 Selects the Component source AV 1 (VIDEO 1) Selects the Composite Video source HDMI 2 Selects the HDMI source 2 5 COMP 2 Not available at this model
Change the RCU Battery Display Mode 1. Remove the battery cover Turning the monitor on 1. Correctly insert the power cord into monitor and into the power outlet. 2. Ensure the AC switch is set to “—“. 3. Press the power button on the remote or side control panel. Slide back and remove the battery cover in the direction of the arrow. 2. Insert the batteries Align and insert two AAA batteries according to their plus and minus ports (as indicated in the remote control). 3.
6. To switch audio between the main source and the subsource: Using the remote, press AUDIO. PIP mode 1. Select the main source – Using the remote, press the desired source button (VGA, HDMI1, HDMI2, COMP, VIDEO or S-V). 7. Note: For additional PIP functionality, press MENU and navigate to the Display Settings menu. Use the arrow buttons ( ) to navigate to the desired PIP feature and press ENTER. Press to toggle through the associated options and press ENTER to select the highlighted option. 2.
OSD (On Screen Display) Menu Function Graphics Mode Main Menu Image Settings Sub-Menu Scheme Brightness Contrast Sharpness Saturation Hue Backlight Gamma & Color Temp Main Display Settings Sub-Sub-Menu Gamma Color Temp Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset Aspect Ratio Zoom Auto Scan Select source Description Disabled in Graphics mode Adjust the brightness of the screen Adjust the contrast of the screen Adjust the sharpness of the screen Disabled in Graphics mode Disabled
Video Mode Main Menu Image Settings Sub-Menu Scheme Brightness Contrast Sharpness Saturation Hue Backlight Gamma & Color Temp Display Settings Display Settings Main Sub-Sub-Menu Gamma Color Temp Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset Aspect Ratio Zoom Auto Scan Description Disabled in Graphics mode Adjust the brightness of the screen Adjust the contrast of the screen Adjust the sharpness of the screen Disabled in Graphics mode Disabled in Graphics mode Adjust the backligh
On-Screen Display (OSD) Menu Overview Image settings – Main setting Audio Settings Image settings - continued Basic Settings Display settings (PIP) Advanced Settings Display settings - continued System Status 13
Navigating through the Menu System 1. With the power on, press MENU. The Image Settings menu will display. 2. Within the menu, use and ENTER to navigate through the menus and adjust options. 3. Press MENU to return to the previous menu. To exit the menu system, press EXIT. Image Settings Menu Color Temp and Gamma Adjusts red, green, blue gain and red, green blue offset. This menu is used for making common image adjustments. Gamma Options: Off, 2.2 Default: 2.
Display Settings Menu Audio Settings Menu This menu is used for common source adjustments. This menu is used for adjusting volume settings. MAIN The Display Setting Mode. Aspect Ratio Volume Adjust the sound. Press or , select the desired level, and then press ENTER.
Basic Settings Menu Advanced Settings Menu This menu is used to make initial set-up adjustments to the OSD (On-Screen Display) menu and other on-screen messages. OSD Transparent Auto Adjustment Set the menu transparency. Press or , select the desired level, and then press ENTER. Range: 0~100 Default: 0 Forces the monitor to reacquire and lock to the input signal. This is useful when the signal quality is marginal. Note: This feature does not continually reacquire the signal.
7 Default Setting System Status Menu Item Default Value This read-only menu provides information on the active sources and the latest firmware version. Power switch Off Brightness 50 Backlight 80 Contrast 50 Color Temp. 9300 K Source Auto Detection Off OSD Language English Auto Off Monitor ID 01 IRFM Off Baud rate115200 1. When using VGA as signal source, go to Advanced Settings in OSD menu and select VGA ADC Settings, then choose User ADC Calibration. 2.
8 Touch Operation 1 Connect the signal cable to monitor, then turn on computer. II. Wait for the beep sound, and the cursor will move to near the upper left corner of the display automatically. 2. Connect the USB cable with monitor and computer. 3. Turn on the monitor (AC switch on). 4. Connect one side of USB cable (Type-B USB connector) on the monitor side. See below picture. (Check “Connection” section for exact location). 5.
WXGA 1360x768 1280 x 720 VESA 1280 x 768 1280 x 800 1152x864 SXGA 1280x1024 SXGA+ 1400 x 1050 1440 x 900 WSXGA+ 1680 x1050 SDTV EDTV UXGA 1600 x 1200 1920 x 1080 WUXA 1920 x 1200 NTSC PAL 480p 576p 720p 1280x720 1280x720 1280x720 HDTV 1080p 1920x1080 Composite S-Video O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 480i 576i O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O
10 Specification LCD panel Item Resolution Brightness Contrast Ratio Response time (GTG) Aspect Ratio Horizontal Sync. Vertical Sync.
Dimensions Model A 87.1 B 150.
11 Troubleshooting 12 Compliance Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Perform the adjustments according to page 8 “Operation The Monitor” If the problem you have experienced isn’t described below or you can’t correct the problem, stop using the monitor and call service personnel or your dealer.
13 Appendix Moving and Carrying Notice Moving Notice: Moving the monitor requires at least two people. If not, it may drop and a serious injury may result. Moving/shipping the monitor, please hold the white handles. Carrying Notice: This monitor is heavy; please follow as below instruction, when you ready to carry the monitor. If not, it may cause an injury.
Wall Mount Safety Notes 1. Please make sure if the bracket is fixed to the solid wall / solid pillar for fear of falling due to heavy weight. 2. After assembling, please don‘t pull or shake violently. 3. Please don‘t install the bracket directly under the sunshine or humidity / high temperature places for fear that the quality is effected. 4. Installing the bracket over 10 cm from each wall side and begin vertical to the ground is the suggested installing position.
Legamaster International B.V. Kwinkweerd 62 • Postbus 111 • 7240 AC Lochem tel.: (+31) (0)573-713000 • fax.: (+31) (0)573-713001 email: info@legamaster.com • internet: www.e-legamaster.
