Submittal
www.legendvalve.com
800-752-2082
SUBMITTAL SHEET
JOB NAME ITEM TAG
JOB LOCATION PART NUMBER
CONTRACTOR DATE
ENGINEER APPROVAL DATE
LEAD-FREE PACK JOINT UNION
T-4301NL
MATERIAL SPECIFICATION
PART MATERIAL SPECIFICATION
1 Body Lead-free cast bronze ASTM B584 UNS C89836
2 Pack-joint nut Cast bronze ASTM B584 UNS C83600
3 Pack-joint gasket Buna-N (NBR) nitrilic rubber Commercial grade
4 Pack-joint anti-friction ring Nylon* resin Commercial grade
5 Pack-joint clamp bolt Stainless steel AISI grade 304
*Nylon is a registered trademark of the DuPont company
DIMENSIONS
Size A B C
1/2" 0.48 3.51 1.56
3/4" 0.44 4.13 1.86
1" x 3/4" 0.49 / 0.44 4.20 2.20 / 1.86
1" 0.49 4.19 2.20
1-1/4" x 1" 0.57 / 0.49 4.53 2.86 / 2.20
1-1/4" 0.57 4.87 2.86
1-1/2” x 1” 0.61 / 0.49 5.37 2.84 / 2.20
1-1/2" 0.61 6.57 2.84
2" 0.71 7.21 3.63
Lead-free design is suitable for all no-lead potable water
installations, in full compliance of all lead-free plumbing laws.
CTS pack-joint end connections provide the maximum pullout
resistance against internal pressure variations and backlling
stress.
Designed and manufactured for the repair of, or new
underground water service applications only.
Insert stiffeners (Model T-4500, sold separately) are required at
each pack-joint connection, when installing Polyethylene (PE)
plastic tubing.
Available in nominal sizes 1/2” to 2” copper-tubing-size.
Working Pressure, Non Shock (PSI)
1/2”-1”: 100 psi - 100°F Max
1¼”-2”: 80 psi - 100°F Max
Pictured:
T-4301NL
5
4
2
1
3
N
O
L
E
A
D
L
E
G
E
N
D
TM
• Third-party tested and certied in
compliance with U.S. Federal Public
Law 111-380 (National lead-free
plumbing law).
• Manufactured to AWWA C800
Specications.
• Pack-joint end connections are
designed to be installed onto the
following tubing types:
1. Types K or L copper water tubing
compliant with ASTM B88.
2. Polyethylene plastic tubing
compliant with ASTM D2737
SDR 9 (insert stiffener
required).
• Manufactured in an ISO accredited
facility.
A
B
C
Pictured:
T-4301NL
Cutaway view