Submittal Sheet

www.legendvalve.com
800-752-2082
SUBMITTAL SHEET
JOB NAME ITEM TAG
JOB LOCATION PART NUMBER
CONTRACTOR DATE
ENGINEER APPROVAL DATE
WROT COPPER PRESS-TO-CONNECT TUBING FITTINGS
Elbows, Caps, Tees, Couplings and Adapters
MATERIAL SPECIFICATION
PART MATERIAL SPECIFICATION
Press congurations Wrot copper alloy ASTM B152 C11000 and ASTM B75 C12200
Threaded adapters Lead-free brass UNS Alloy C46500
EPDM O-ring Commercial grade
Stainless steel grip ring
(2-1/2” to 4” ttings)
AISI Grade 304
Acetal resin guide ring
(2-1/2” to 4” ttings)
Commercial grade
Press-type end connections eliminate the need for soldering, reducing
labor and material costs and eliminating the re hazard associated with
the process.
Press-to-connect connections are designed for installation onto ASTM B88
types K, L and M hard-drawn copper tubing. Coiled (annealed) soft copper
tubing is not recommended, but can be used if ends are made round.
Fittings in nominal sizes 1/2” to 4” feature molded recess O-rings, which
when un-pressed, create leak paths at multiple points during the pressure
test, to quickly identify an un-pressed joint.
Available in nominal tubing sizes 1/2” to 4” in a variety of congurations.
Threaded adapters are lead-free brass.
Working Pressure, Non Shock (PSI)
Cold working pressure (CWP): 200 psi
Saturated steam (WSP): 15 psi
Vacuum-rated to 29.2 in/Hg at 68° F
Operating temperature range: 0° F to 250° F
Certifications/Listings:
NSF/ANSI 61: Drinking water components - Health effects.
NSF/ANSI 372: Drinking Water components - Lead content.
Uniform Plumbing Code (UPC).
National Plumbing Code of Canada.
Standards:
ASTM B152 Alloy C11000: Standard Specication for Copper Sheet, Strip and Plated Rolled Bar.
ASTM B75 Alloy C12200: Standard Specication for Seamless Round Copper Tube for general engineering applications.
ANSI/ASME B16.51 Standard Specication for Copper and Copper Alloy Press-Connect Pressure Fittings.
ANSI/ASME B16.22: Standard Specication for Wrought Copper and Copper Alloy Solder Joint Pressure Fittings.
ANSI/ASME B1.20.1: Standard Specication for Pipe Threads, General Purpose (inch).
PRESS FITTING INSERTION DEPTH:
Nominal tubing
size:
1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"
Insertion Depth
(in)
3/4" 15/16" 15/16" 1" 1-7/16" 1-5/8" 1-3/4" 2" 2-1/4"
REQUIRED MINIMUM DISTANCE BETWEEN PRESS JOINTS:
Nominal tubing
size:
1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"
Distance (in)
1/2" 1/2" 1/2" 1/2" 5/8" 3/4" 3/4" 3/4" 3/4"
N
O
L
E
A
D
L
E
G
E
N
D
TM