Product Brochure

SWITCHES, DIMMERS, OUTLETS, AND ACCESSORIESSWITCHES, DIMMERS, OUTLETS, AND ACCESSORIES
The adorne Frame System
The frame is the foundation upon which the adorne
modular system is built. It is manufactured with high-
strength galvanized metal and includes a ground wire.
Frames include plastic spacers. The spacers remain in
place for devices with 2-Module backbodies. They must be
removed for devices with 3-Module backbodies, such as
dimmers and GFCI outlets.
The frame completes the enclosure, providing a safe
installation during the construction phase and allowing
the wall plate to be installed at the end of the project.
Each frame includes a leaded ground that supports the
full adorne system. Most switches, outlets, and wall
plates (including cast metals) are automatically grounded
to the frame, saving time and ensuring a safe and reliable
ground path.
Devices simply snap into the frame from the front. During installation, screw the frame
to the box, then pull the wires through the frame and wire the device. Then, simply
snap the device into the frame.
1-Gang, 2-Module
with Spacers
2-Gang with Spacers1-Gang, 3-Module
without Spacers
3-Gang with Spacers
The adorne Modular System
Complete versatility and unmatched flexibility
adorne fits in all existing
NEMA-approved wallboxes.*
* Does not apply to Pop-Out Outlet.
** Does not apply to Pop-Out Outlet,
20A Outlet, or 20A GFCI Outlet.
The frame is grounded. Device snaps into the frame and is
automatically grounded**.
It self-aligns without any screws.
Wall plate snaps onto
frame; no screws required.
Modular system solves
device alignment problems,
improving fit and finish in
multi-gang installations.
Standard
Wallbox
Frame
Device
Wall Plate
Spacers
4-Gang with Spacers
19
18
Ground Wire
Also available in 5 and 6-Gang with Spacers.