User Guide

Page 9
301 Fulling Mill Road, Suite G ©Copyright 2008 by On-Q/Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
6. How to place a Unit in Monitor Mode
Press the MONITOR button:
The MONITOR button backlight changes
from white to red.
The display changes for 2 seconds to show
that Monitor is ON. This means the microphone
in the Unit is turned on and all other non-muted
and non-monitored Units will hear an sounds
occurring in the monitored room.
The display changes back to normal after
2 seconds.
The Monitored Unit will not receive Pages or hear
Door Unit door tones, but can receive Selective Calls.
This feature is handy for elder care where you can
Hear a noise and selectively ask if everything is OK.
The Monitored Unit cannot initiate Pages or
Selective Calls.
MONITOR may be disabled at a particular Unit through
its Settings menu, Room Options. This is handy for
a child’s room where you wouldn’t want the child to
put their Unit in Monitor to avoid Page contact.
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
Monitor
Is
ON.
Monitor
Is
ON.
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
Monitor
Is
ON.
Monitor
Is
ON.