User Guide

Page 16
301 Fulling Mill Road, Suite G ©Copyright 2008 by On-Q/Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
E. System Personalization
The following section explains how to use any Selective Call
Room Unit to personalize both global options and local
settings of the Selective Call System using the Settings
selection from the Room Unit Main Menu.
1. Choosing Unit Names
From any Room Unit in the house,.
use the arrow buttons to highlight
SETTINGS and press
TALK/SELECT.
From the SETTINGS screen, use
the arrow buttons to highlight Unit
Names and press TALK/SELECT.
The UNIT NAMES screen will have
your current Unit Name highlighted.
Press TALK/SELECT to select it (it
will flash and begin beeping at full
volume so that it is audible from
most places within the home) or
use the arrow keys to select
another location.
Press TALK/SELECT and the
screen will show your “old” Unit
Name with a New Unit Name area
highlighted.
Press TALK/SELECT again and
use the arrow buttons to select a
New Unit Name from the list in
Table 2 for Rooms or Patios and
Table 3 for Doors or Patios.
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
UNIT NAMES
ROOM 2
Select Unit:
BACK
UNIT NAMES
ROOM 2
Select Unit:
BACK
SETTINGS
Reply Options
Unit Names
Room Options
Patio Options
Door Options
SETTINGS
Reply Options
Unit Names
Room Options
Patio Options
Door Options
UNIT NAMES
ROOM 2
Old Name:
BACK
New Name:
ROOM 2
UNIT NAMES
ROOM 2
Old Name:
BACK
New Name:
ROOM 2