User Guide

Page 7
301 Fulling Mill Road, Suite G ©Copyright 2008 by On-Q/Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
3. How to Selectively Call a Location
Press the arrow buttons to
highlight the location you want
to call.
Press and hold the TALK/SELECT
button and speak.
When you press the button, a tone
will be heard at the receiving unit
to tell them you are beginning to talk.
When you release the button, a second tone
is heard at the receiving unit to let them know
you have finished speaking and their 10 seconds
(default) hands-free reply time has started.
At the end of this 10 second time, a third tone is
heard at the receiving Unit to define the end of the call.
If the Unit you attempt to Selectively Call is in MUTE
mode, the sender will see this screen for 2 seconds.
The display changes back to normal after
the 2 second period.
If the unit you attempt to Selectively Call is involved in
another conversation, the sender will see this screen
for 2 seconds.
The display changes back to normal after
the 2 second period.
A Patio Unit cannot initiate a Selective Call
(No LCD screen to select receiver).
A Door Unit may be selectively called.
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
Destination
Muted
Try again
later.
Destination
Muted
Try again
later.
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
Destination
Muted
Try again
later.
Destination
Muted
Try again
later.
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
Destination
Busy
Try again
later.
Destination
Busy
Try again
later.
ROOM1
ROOM2
ALL
PATIO1
SETTINGS
DOOR1
Destination
Busy
Try again
later.
Destination
Busy
Try again
later.