Specification Sheet

adorneTM GUIDE SPECIFICATIONS
Project Name Project No. Date
Project Location 16140-12 Wiring Devices
A. Nightlights:
1. General: ETL tested and listed for compliance with UL 1786.
2. Nightlight, 1-Module: adorne
Part No. AANLM14; ambient light level sensor,
soft, glowing LED light; pairs with a switch or outlet in a 1-gang, 3-module plate;
light levels include: "always off," "low," "medium," and "high".
3. Nightlight, 2-Module: adorne
Part No. AANLM24; ambient light level sensor,
soft, glowing LED light; light levels include: "always off," "low," "medium," and
"high".
4. Portable Nightlight/Flashlight: adorne
Part No. AARNL2; ambient light level
sensor, soft, glowing LED light; push nightlight to remove it from wall for use as a
flashlight, device recharges while mounted in wall and operates for up to 10
hours during a power failure; light levels include: "always off," "low," "medium,"
"high," and "flashlight".
B. Accent Nightlights:
Specifier Note: Accent Nightlights are not compatible with pop-out outlets and may not fit in
metal mudrings with round corners.
1. General: ETL tested and listed for compliance with UL 514D.
2. General: The accent nightlight can be added to any adorne
product and is
compatible with any size wall plate. Device is invisible once installed and can be
activated by placing a finger under the wall plate. This causes the light to cycle
through several light level options including: Daytime "Auto-OFF" and "Always
ON", Night Time "high," "medium," "low," "ultra-low," and "OFF."
3. Accent Nightlight, 1-Gang: adorne
Part No. AAAL1G4.
4. Accent Nightlight, 2-Gang: adorne
Part No. AAAL2G2.
5. Accent Nightlight, 3-Gang: adorne
Part No. AAAL3G2.
6. Accent Nightlight, 4-Gang: adorne
Part No. AAAL4G2.
C. Locator Status Lights:
1. General: A small locator light can be added to a Paddle, Whisper, or Push switch
or dimmer; standard feature on sofTap, SensaSwitch, Touch, and Wave switches
and dimmers. Facilitates locating the switch or dimmer in the dark. Locator light
is on when the load is off and off when the load is on.
2. Locator Status Light: adorne
Part No. AALSL6; CETLus Listed.
D. Blank Modules:
1. General: ETL tested and listed for compliance with UL 514D.
2. General: Blank inserts can be paired with other 1-module devices such as the
Nightlight, Paddle Switch, or USB, in a 1-gang wall plate to provide a complete,
finished appearance.
3. Blank, 1-Module: adorne
Part No. AABK1[W4][M4][G4]; [white] [magnesium]
[graphite] finish.
E. Mounting Frames:
1. General: ETL tested and listed for compliance with UL 514D.
2. Mounting Frame, 1-Gang: adorne
Part No. AF1G.
3. Mounting Frame, 2-Gang: adorne
Part No. AF2G.
4. Mounting Frame, 3-Gang: adorne
Part No. AF3G.
5. Mounting Frame, 4-Gang: adorne
Part No. AF4G.
F. Keystone Frames: