Specification Sheet

ManualsBrandsLegrand ManualsLight DimmersADWR703HW4

adorneTM GUIDE SPECIFICATIONS

Project Name Project No. Date

Project Location 16140-1 Wiring Devices

This guide specification is written according to the Construction Specifications Institute (CSI)

formats, including MasterFormat, SectionFormat, and PageFormat.

Carefully review and edit this section to meet the requirements of the project and local building

code. Coordinate this section with other specification sections and drawings.

Delete all "Specifier Notes" when done editing this section.

SECTION 16140

WIRING DEVICES

PART 1 - GENERAL

1.1 CONDITIONS AND REQUIREMENTS

A. The General Conditions, Supplementary Conditions, and Division 1 – General

Requirements apply.

1.2 SECTION INCLUDES

Specifier Note: Retain and edit subparagraphs below to cross-reference products specified in

PART 2 - PRODUCTS. Delete those products not retained in PART 2 after editing.

A. [Pop-Out] [Tamper-Resistant] [Tamper-Resistant GFCI] [USB] [Energy-Saving

ON/OFF] [Wireless] Outlets.

B. [Paddle] [Whisper] [Push] [sofTap] [Sensa] [Touch] [Wave] switches.

C. [Paddle] [Whisper] [Push] [sofTap] [Sensa] [Touch] Dimmers.

D. Paddle fan speed controls.

E. Accessories.

F. Wall plates.

1.3 RELATED SECTIONS

Specifier Note: In this article, specify work specified in other sections that is related to work of

this section.

A. Section 13700 - Security Access and Surveillance: Security systems and components.

B. Division 16 - Electrical: Electrical systems and components.

C. Section 16700 - Communications: Communications and audio-video systems and

components.

Specifier Note: The following paragraph is a sample that may be used in this article. Add to or

delete from the following as appropriate for the specific project.

D. Section [xxxxx] – [Section Title]: [Include brief description of work specified in another

section that is related to the work of this section.]

1.4 REFERENCES

A. National Electrical Manufacturers Association (NEMA):

1. NEMA WD 1-1999 (R2010) - General Color Requirements for Wiring Devices.

2. NEMA WD 6-2012 - Wiring Devices - Dimensional Specifications.

B. Underwriters Laboratories Inc. (UL):

Summary of content (15 pages)

PAGE 1
adorne GUIDE SPECIFICATIONS TM This guide specification is written according to the Construction Specifications Institute (CSI) formats, including MasterFormat, SectionFormat, and PageFormat. Carefully review and edit this section to meet the requirements of the project and local building code. Coordinate this section with other specification sections and drawings. Delete all "Specifier Notes" when done editing this section. SECTION 16140 WIRING DEVICES PART 1 - GENERAL 1.1 A. 1.
PAGE 2
adorne GUIDE SPECIFICATIONS TM 1. 2. 3. 4. 5. 6. 7. 8. 1.5 UL 20 - Standard for General-Use Snap Switches. UL 498 - Standard for Attachment Plugs and Receptacles. UL 508 - Standard for Industrial Control Equipment. UL 514D - Standard for Cover Plates for Flush-Mounting Devices. UL 1310 - Standard for Class 2 Power Units. UL 1472 - Standard for Solid-State Dimming Controls. UL 1786 - Standard for Direct Plug-in Nightlights. UL 1917 - Standard for Solid-State Fan Speed Control.
PAGE 3
adorne GUIDE SPECIFICATIONS TM Specifier Note: Retain as many of the following products as required for a specific project and delete the others. A. Pop-Out™ Outlets: 1. 2. 3. B. General: Outlets comply with UL 498. Pop-Out™ Outlet, 1-Gang: adorne™ Part No.
PAGE 4
adorne GUIDE SPECIFICATIONS TM outlet comes with patented shutter system to prevent children from pushing small objects into the outlet; [white] [magnesium] [graphite] finish; CULus listed. C. USB Outlets: 1. 2. D. Energy-Saving ON/OFF Outlets: 1. 2. E. A. General: Outlets comply with UL 498. Energy-Saving ON/OFF Outlet, 2-Module: adorne™ Part No.
PAGE 5
adorne GUIDE SPECIFICATIONS TM 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Project Name Project Location compatible with all types of loads; features a simple up and down motion, permitting easy on-off control of lighting; CULus listed. Single-Pole, Three-Way: adorne™ Part No.
PAGE 6
adorne GUIDE SPECIFICATIONS TM 13. 14. 15. 16. [magnesium] [graphite] finish; engraved with the word "Master"; compatible with all types of loads; features a simple up and down motion, permitting easy on-off control of lighting; CULus listed. Four-Way: adorne™ Part No.
PAGE 7
adorne GUIDE SPECIFICATIONS TM 2. 3. 4. 5. G. Multi-Location Wireless Master: adorne™ Part No. ASTPRF2[W2][M2][G2]; wireless master, multi-location; [white] [magnesium] [graphite] finish; compatible with all types of loads; features a simple up and down motion, permitting easy on-off control of lighting with RF communication up to 30 feet from master location (hard wired to load) ; CULus listed. Multi-Location Wireless Remote: adorne™ Part No.
PAGE 8
adorne GUIDE SPECIFICATIONS TM finish; compatible with all types of loads; manual-ON/timed-OFF, selectable times of 10, 20, 30 or 60 minutes with a soft touch of the finger; CULus listed. H. Touch™ Switches: 1. General: Switches comply with UL 508. Specifier Note: Retain as many of the following products as required for a specific project and delete the others. 2. Single-Pole, Three-Way: adorne™ Part No.
PAGE 9
adorne GUIDE SPECIFICATIONS TM 4. C. Whisper™ Dimmers: 1. 2. 3. D. Single-Pole, Three-Way, True Universal: adorne™ Part No. ADWR703TU[W4][M4][G4]; single-pole, 3-way, 3-wire; rated 700W; compatible with incandescent, halogen, forward and reverse-phase ELV, MLV, fluorescent, CFL, and LED lamps; [white] [magnesium] [graphite] finish; features classic, elegant lines and a fluid motion, permitting easy on-off control of lighting; includes slider for dimming lights; CULus listed.
PAGE 10
adorne GUIDE SPECIFICATIONS TM 2. 3. F. sofTap™ Dimmers, Multi-Location Wireless: 1. 2. 3. G. Wireless Master, Multi-Location: adorne™ Part No. ADTP600MMH[W2][M2]; 3wire; rated 600W; compatible with incandescent, halogen, forward-phase ELV, MLV, and fluorescent lamps; [white] [magnesium] finish; features classic, elegant lines and a fluid motion, permitting easy on-off control of lighting; includes slider for dimming lights; CULus listed. Wireless Remote, Multi-Location: adorne™ Part No.
PAGE 11
adorne GUIDE SPECIFICATIONS TM 2. I. Touch™ Dimmers: 1. J. 2. 2. 3. Wireless Master, Whole-House: adorne™ Part No. ADTH600RMH[W1][M1]; 2wire; rated 600W; compatible with incandescent and halogen lamps; [white] [magnesium] finish; features translucent face; operates by a touch of the finger on the circle to turn lights on and off; includes arrows on right side of switch for dimming; CULus listed. Wireless Remote, Whole-House: adorne™ Part No.
PAGE 12
adorne GUIDE SPECIFICATIONS TM A. Nightlights: 1. 2. 3. 4. B. General: ETL tested and listed for compliance with UL 1786. Nightlight, 1-Module: adorne™ Part No. AANLM14; ambient light level sensor, soft, glowing LED light; pairs with a switch or outlet in a 1-gang, 3-module plate; light levels include: "always off," "low," "medium," and "high". Nightlight, 2-Module: adorne™ Part No.
PAGE 13
adorne GUIDE SPECIFICATIONS TM 1. 2. 3. 4. 5. G. Keystone Inserts: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 2.6 General: Keystone frames enable audio, video, and data connectivity in an adorne™ wall plate. Pair and keystone insert with a 1-port, 2-port, or 4-port frame and then mount in an adorne™ wall plate for a complete installation. 1-Port Frame: adorne™ Part No. AC1PF[W1][M1]; [white] [magnesium] finish. 2-Port Frame: adorne™ Part No. AC2PF[W1][M1]; [white] [magnesium] finish.
PAGE 14
adorne GUIDE SPECIFICATIONS TM screwless and snap onto the metal frame. All wall plates are UL and ETLapproved. B. Wall plates are ETL and UL tested and listed for compliance with UL 514D. Specifier Note: Retain as many of the following products as required for a specific project and delete the others. Specifier Note: Insert the appropriate part number in the first bracketed box below from the manufacturer’s catalog to correspond to the number of gangs of the device that plate is paired with.
PAGE 15
adorne GUIDE SPECIFICATIONS TM B. 3.3 Repair wall finishes and remount outlet boxes when device plates do not fit flush or do not cover rough wall opening. CLEANING AND PROTECTION A. Clean exposed surfaces using non-abrasive materials and methods recommended by manufacturer. B. Protect wiring devices and accessories until acceptance. END OF SECTION A copyright license to reproduce this specification is hereby granted to non-manufacturing engineers, architects and specification writers.