Wireless Video User Guide

Page 21
301 Fulling Mill Road, Suite G ©Copyright 2013 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
4. System Reset
Although very unlikely, if you are
having serious issues with your
Legrand Wireless Video Intercom
System, Legrand Tech Support may
ask you to reset a Unit or the whole
system and start from scratch.
Before doing that, it would be a
good idea to record all the
particulars about the system
(names, settings, etc.), because the
System Reset will delete all of that
information. Before performing a
“System Reset” from the Master
Unit, you may be asked by Tech
Support to first “Remove one or
more Paired Units”. A “System
Reset” from a Room Unit will simply
clear the memory of that unit.
From the SetUp / Systems Settings
screen, highlight the “System Reset”
line and press the Talk/Select
Button.
Next a caution Pop-up screen will
appear reminding you that all
settings will be erased. Press the
Talk/Select Button to continue.
When the System Reset is
complete, another Pop-up screen
will appear to remind you to consult
the user documentation to create a
new network ID. If this Room Unit is
going to be your new Master, press
the Setup button followed by the
Talk/Select button.
However, if you are simply adding
this Room Unit to a system with an
existing Master Unit, go to the
Master Unit and perform steps E1
after adding the Door Unit (below).