Specification Sheet
adorneTM  GUIDE SPECIFICATIONS 
Project Name  Project No.  Date 
Project Location  16140-12  Wiring Devices 
A.  Nightlights: 
1.  General: ETL tested and listed for compliance with UL 1786. 
2.  Nightlight, 1-Module: adorne
™
 Part No. AANLM14; ambient light level sensor, 
soft, glowing LED light; pairs with a switch or outlet in a 1-gang, 3-module plate; 
light levels include: "always off," "low," "medium," and "high". 
3.  Nightlight, 2-Module: adorne
™
 Part No. AANLM24; ambient light level sensor, 
soft, glowing LED light; light levels include: "always off," "low," "medium," and 
"high". 
4.  Portable Nightlight/Flashlight: adorne
™
 Part No. AARNL2; ambient light level 
sensor, soft, glowing LED light; push nightlight to remove it from wall for use as a 
flashlight, device recharges while mounted in wall and operates for up to 10 
hours during a power failure; light levels include: "always off," "low," "medium," 
"high," and "flashlight". 
B.  Accent Nightlights: 
Specifier Note: Accent Nightlights are not compatible with pop-out outlets and may not fit in 
metal mudrings with round corners. 
1.  General: ETL tested and listed for compliance with UL 514D. 
2.  General: The accent nightlight can be added to any adorne
™
 product and is 
compatible with any size wall plate. Device is invisible once installed and can be 
activated by placing a finger under the wall plate. This causes the light to cycle 
through several light level options including: Daytime "Auto-OFF" and "Always 
ON", Night Time "high," "medium," "low," "ultra-low," and "OFF." 
3.  Accent Nightlight, 1-Gang: adorne
™
 Part No. AAAL1G4. 
4.  Accent Nightlight, 2-Gang: adorne
™
 Part No. AAAL2G2. 
5.  Accent Nightlight, 3-Gang: adorne
™
 Part No. AAAL3G2. 
6.  Accent Nightlight, 4-Gang: adorne
™
 Part No. AAAL4G2. 
C.  Locator Status Lights: 
1.  General: A small locator light can be added to a Paddle, Whisper, or Push switch 
or dimmer; standard feature on sofTap, SensaSwitch, Touch, and Wave switches 
and dimmers. Facilitates locating the switch or dimmer in the dark. Locator light 
is on when the load is off and off when the load is on. 
2.  Locator Status Light: adorne
™
 Part No. AALSL6; CETLus Listed. 
D.  Blank Modules: 
1.  General: ETL tested and listed for compliance with UL 514D. 
2.  General: Blank inserts can be paired with other 1-module devices such as the 
Nightlight, Paddle Switch, or USB, in a 1-gang wall plate to provide a complete, 
finished appearance. 
3.  Blank, 1-Module: adorne
™
 Part No. AABK1[W4][M4][G4]; [white] [magnesium] 
[graphite] finish. 
E.  Mounting Frames: 
1.  General: ETL tested and listed for compliance with UL 514D. 
2.  Mounting Frame, 1-Gang: adorne
™
 Part No. AF1G. 
3.  Mounting Frame, 2-Gang: adorne
™
 Part No. AF2G. 
4.  Mounting Frame, 3-Gang: adorne
™
 Part No. AF3G. 
5.  Mounting Frame, 4-Gang: adorne
™
 Part No. AF4G. 
F.  Keystone Frames: 










