Product Brochure

3
Catalog No./Item Description/Specifications
V518 External Elbow – For outside
V718 surfaces at right angles.
718WH
V5700F Flexible Section – For getting
around difficult angles. End
fittings and bulk conduit lengths
available. Maximum painted
length 3' (915mm) longer
lengths furnished unpainted,
consult factory for availability.
5701 Coupling – For joining and
supporting lengths of V500 or
700 Series raceway. One
coupling supplied with
each length.
V5703 Supporting Clip – For supporting
lengths of V500 or 700 Series
raceway at any point desired.
5709 Ground Clamp – Provides
additional grounding or to ground
remotely located devices. Attach
ground wire to screw as required by
NEC. Insert into V500 or 700
Series raceway before installing.
V5711LH A Internal Twisted Elbows – For 90°
V5711RHA twist with 90° turn including a flat
5711LHAWH run on sidewall to a flat run on
5711RHAWH ceiling or on door edge or window
trim. Break out crescent twistout in
cover to use with 700 Series.
V5715 Tee – For branches at right angles.
5715WH Break out crescent twistout in cover
to use with V700.
Catalog No./Item Description/Specifications
V500 Raceway – .040" (1.0mm) steel.
Comes in 10 ft. (3.05mm) lengths,
one 5701 Coupling furnished
with each length. Five ft. (1.525m)
lengths available, order V500-5.
V700 Raceway – .040" (1.0mm) steel.
700WH Comes in 10 ft. (3.05mm) lengths,
one 5701 Coupling furnished with
each length. Five ft. (1.525m)
lengths available, order V700-5.
502 Bushing – Protects wires from
702 abrasion. Bushing slips into open
end of raceway where it enters
a fitting.
V504 Mounting Strap (1- or 2-Hole) –
V704 Convert to one-hole by breaking off
704WH at score. Lanced tab holds strap in
place while fastening to surface.
V506 Connection Cover – To cover
V706 openings where lengths of V500
706WH or 700 Series, not squarely cut,
come together.
V511 90° Flat Elbow – For right angle
V711 turns on same surface.
711WH
V512 45° Flat Elbow – For diagonal 45°
V712 turns on same surface.
V517 Internal Elbow – For inside
V717 surfaces at right angles.
717WH
500 & & 700 Series Raceway & Fittings Ordering Information
A
B
CAT. # A B
V504 1 7/8" (47mm) 1/2" (12.7mm)
V704 1 7/8" (47mm) 5/8" (15.4mm)
2 3/4"
(70mm)
NOTE: Use #6 flat head screws with all fittings requiring screws except V504/V704, and V57200 Series; with V504/V704 use #8 pan head
screws; with V57200 Series use #8 flat head screws.
3/4"
(19.1mm)
21/32"
(16.7mm)
3/4"
(19.1mm)
17/32"
(13.5mm)
3/4"
(19.1mm)
2"
(51mm)
1 1/4"
(32mm)
3/4"
(19.1mm)
18" (457mm) Overall
2"
(51mm)
2 1/2"
(64mm)
2"
(51mm)
2 1/2"
(64mm)
2 1/2"
(64mm)
2 1/2"
(64mm)
7/8"
(22.2mm)
2 1/2"
(64mm)
2 1/2"
(64mm)