Product Brochure

4
Catalog No./Item Description/Specifications
V5786 Adjustable Offset Connector –
V5786WH Eliminates offsetting raceway when
connecting to surface type panel
boxes. The adjustment from
surface to center of bushings is
5/8" (15.9mm) minimum to 1 3/8"
(35mm) maximum. Break out
crescent twistout in cover to use
with 700 Series. 1/2" (12.7mm)
chase nipple and locknut furnished.
5790B Armored Cable Connector
(Galvanized) – For connecting
14/2, 14/3, 12/2, and 12/3 armored
cable to Wiremold fittings. Use a
short piece of V500/V700 raceway
(1 5/8" (41mm) min.) between this
connector and fitting. Not for
connection to 1/2" (12.7mm)
Flex Conduit.
5791 5700 Series Box EMT Connector –
Joins 1/2" (12.7mm) EMT
directly into any V5700 Series
Wiremold box.
V2475D 2400 Series Raceway Bridge
Fitting – For allowing 2400
Series Raceway to bridge over
existing installations of
V500/V700 Series Raceway
V4075DA 4000 Series Raceway Bridge
Fitting – For allowing 4000
Series Raceway to bridge over
existing installations of
V500/V700 Series Raceway.
1"
(25mm)
2"
(51mm)
1 3/4"
(45mm)
1 3/8"
(35mm)
2 3/8"
(61mm)
2 1/4"
(57mm)
7/8"
(22.2mm)
8 1/8"
(206mm)
4 3/4"
(121mm)
3 9/16"
(90mm)
Catalog No./Item Description/Specifications
V5719 Corner Box – Allows ample splice
room. Each leg of base has 1/2"
trade size KO.
5780 Special Nipple (Galvanized) – Has
female 3/8" (9.5mm) pipe thread
inside and male 1/2" (12.7mm) pipe
thread outside. For hanging 3/8"
(9.5mm) or 1/2" (12.7mm) fixtures
to Wiremold fittings with 1/2"
trade size KOs.
5781
5781A
5782A Conduit Connector (Galvanized) –
For connecting raceway to conduit.
Break out crescent twistout to use
with V700.
V5783 Elbow Box Connector – For
connecting raceway at right angles
to conduit boxes, panel boxes, etc.,
having a KO for 1/2" (12.7mm)
conduit. Break out crescent
twistout in cover to use with V700.
V5784 Elbow Conduit Connector – For
connecting raceway at right angles
to 1/2" (12.7mm) conduit or
armored cable connectors. Break
out crescent twistout in cover to
use with V700.
V5785 Combination Connector – For
5785WH connecting raceway, without
offsetting, to any 3 1/4" (83mm) or
4" (102mm) outlet box mounted
on the surface with a KO for 1/2"
(12.7mm) conduit. The base end
and bottom has two 1/2" trade size
KOs. Break off cover extension to
use with 700 Series. Spring steel
bushing included for end connection
to box, eliminating conduit nipple
and locknut.
1/2" (12.7mm) Male (5782)
3/4" (19.1mm) Male (5782A)
1/2" (12.7mm) Male (5781)
3/4" (19.1mm) Male (5781A)
1/2" (12.7mm) Female
1/2" (12.7mm) Male
2 1/8"
(54mm)
1 1/4"
(32mm)
•
2 1/8"
(54mm)
1 1/4"
(32mm)
•
1 5/16"
(33mm)
1 3/16"
(30mm)
1 3/16"
(30mm)
2 1/2"
(64mm)
2 1/8"
(54mm)
2 1/2"
(64mm)
3"
(76mm)
1 5/16"
(33mm)
1 3/8"
(33mm)
With 1/2"
(12.7mm)
Locknut
1/2"
(12.7mm)
3/4"
(19.1mm)
1 3/4"
(44mm)
500 & 700 Series Raceway Fittings Ordering Information
NOTE: Use #6 flat head screws with all fittings requiring screws except V504/V704, and V57200 Series; with V504/V704
use #8 pan head screws; with V57200 Series use #8 flat head screws.
Box Connector (Galvanized) –
For connecting raceway to conduit
boxes, panel boxes, etc., having a
KO for conduit. May also be used
with conduit type fittings. Break out
crescent twistout to use with V700.