® ® wireless Lighting Specification Guide Legrand, North America 60 Woodlawn Street West Hartford, CT 06110 1.877.BY.LEGRAND (295.3472) www.legrand.us 570 Applewood Crescent Vaughan, Ontario L4K 4B4 905.738.9195 www.legrand.
TABLE OF CONTENTS SAFETY CONSIDERATIONS Safety Considerations Table of Contents Lamp Replacement System Introduction 2-3 Configuring the System 4-9 Setting a House ID 5-6 Setting up Remote Controls 7-9 Dimmer Derating For multi-gang installations, use pliers to break off the specified heat sink fins. De-rate the maximum load according to the following table.
INTRODUCTION INTRODUCTION adorne Whole-House Wireless adorne Wireless Lighting Control Design System range: adorne Wireless Lighting System’s unique hierarchal structure provides three levels of control for unprecedented convenience and flexibility. • • More than 100 feet (up to 300 feet with use of repeater MRR2-G) Supports up to 100 loads The Whole-House system provides unrivaled convenience, security, and energy-savings for both remodel projects and new construction.
SETTING A HOUSE ID CREATING GROUPS Configuring an adorne Wireless Lighting System GROUP Level Control In order to function, adorne Wireless Lighting devices have to be “bound” together into a simple wireless network. This is very easy to do, but it helps to understand how and why it works. A GROUP is two or more devices bound together so that each device controls itself and other devices in the same way. For example, double-tapping the on/off button will turn all devices on. 1.
CREATING GROUPS SETTING UP REMOTE CONTROLS GROUP Level Control Setting Up Remote Controls Creating a New Group 2. Press and hold the on/off button of one device that you want to include in the GROUP until the LED flashes AMBER. A ROOM is a number of adorne Wireless Lighting devices (expect HOUSE level devices or repeaters) bound together under the control of one or more remote controls. Room remote controls allow users to set, modify, and recall up to four lighting scenes.
SETTING UP A WHOLE-HOUSE REMOTE CONTROL SETTING UP A WHOLE-HOUSE REMOTE CONTROL HOUSE Level Control HOUSE Level Control With adorne Wireless Lighting, users can control their entire home with a single touch using HOUSE scenes. Other important HOUSE level functions include occupancy emulation and Panic mode. Creating a New Scene 1. Adjust the light levels throughout the house (or room) to the desired settings for the scene. 2.
CUSTOM SETTINGS CUSTOM SETTINGS adorne Wireless Lighting Custom Settings adorne Wireless Lighting Custom Settings adorne Whole-House dimmers and switches include several custom features that allow you to easily adjust system settings. Custom Settings: Switches Custom Settings: Dimmers To enter the dimmer’s Custom Setting mode, first ensure that the status LEDs on all devices are solid WHITE. Then, press and hold the dimmer’s on/off button for 10 seconds until the LED blinks GREEN.
EXPANDING THE SYSTEM AND INTERFACING WITH OTHER PROGRAMS EXPANDING THE SYSTEM AND INTERFACING WITH OTHER PROGRAMS Expanding an adorne Wireless Lighting System About RF and RF Range An adorne Wireless Lighting System may be expanded in a number of ways: adorne Wireless Lighting uses the 900MHz band for license-free, high-speed control communication. These products use multiple channels simultaneously in this band, ensuring reliable communications without interference from other wireless devices.
EXPANDING THE SYSTEM AND INTERFACING WITH OTHER PROGRAMS Interfacing with Other Automation Systems via the RS232 Network Controller Users can connect their adorne Wireless Lighting with external automation systems for expanded functionality by using the RS232 Network Controller (MR232-G). The RS232 communicates control commands to adorne Wireless Lighting components using the controllers of other home systems.
EXPANDING THE SYSTEM AND INTERFACING WITH OTHER PROGRAMS Common Device Applications OPERATING THE SYSTEM Using adorne Wireless Lighting Dimmers, Switches, and Plug-In Modules Security Systems Connect adorne Scene Interfaces and security systems using a two-wire connection between a maintained or momentary output relay at the alarm panel and the desired input on the scene interface.
OPERATING THE SYSTEM Using adorne Wireless Lighting Room and House Remote Controls OPERATING THE SYSTEM Operating an adorne Wireless Lighting System RF Lighting Control Key Fob Room and House Remote Controls have a paddle on the right and four scene buttons on the left. House Remote Controls look like Room Remote Controls, with the difference being the house icon on the face. When pressed by the user, the Key Fob buttons recall room or house scenes or activate the panic feature (flashing lights).
OPERATING THE SYSTEM DESIGNING A SYSTEM Using Occupancy Emulation/Vacation Mode Designing an adorne Wireless Lighting System The Repeater monitors all adorne Wireless Lighting network traffic, and records a seven-day “loop” of network events. When activated, it “replays” the recorded loop, providing a highly realistic emulation of occupancy – a great security feature when homeowners are away.
PRODUCT OVERVIEW PRODUCT OVERVIEW Wireless Whole-House Lighting Controls Touch ™ The adorne Whole-House lighting system provides unrivaled convenience, security, and energy- NAME SPECIFICATIONS savings for both remodel projects and new construction.
PRODUCT OVERVIEW PRODUCT OVERVIEW Accessories Accessories NAME COLOR SPECIFICATIONS PART NUMBER Plug-In Lamp Module White Allows remote control of table or floor lamps up to 300W when used with the adorne Whole-House Lighting System. Simply plug the module into any grounded, 120V outlet and then plug the lamp into the module.
SPECIFICATIONS SWITCHES, DIMMERS, OUTLETS, AND SPECIFICATIONS ACCESSORIES Specifications Specifications Physical Dimmers and Switches for Permanent Installation All wireless devices and accessories shall be UL listed and FCC approved as required. • Tapping the on/off button once shall cause the dimmer to return to its last used non-zero level. Dimmers shall incorporate all the dimmer features indicated above with the exception of wireless remote control.
SPECIFICATIONS SWITCHES, DIMMERS, OUTLETS, AND ACCESSORIES FAQs Specifications FAQs Wireless Room Control Scene Interface/Contact Closure It shall be possible to assign one or more remote controls with a number of other wireless devices in a room, without the use of tools or coding devices. When so assigned, it shall be possible to record up to fifteen lighting scenes per room.
FAQs SWITCHES, DIMMERS, OUTLETS, AND ACCESSORIES FAQs Q: How is system programming accomplished? Q: Are neutrals required? A: All programming is accomplished by simply pressing and holding the on/off button for 5 seconds. This sends an RF broadcast message throughout the system, which allows devices to be bound into the desired groups and room configurations. A full how-to video library with step-by-step instructions can be found on our website at www.adornemyhome.com, in the Install section. A: Yes.
