Installation Guide

Wiremold
®
Meeting Rooms Solutions – Transition Channel
Installation Instructions
No: 1 010 884R1 – 09/12
Catalog Number(s): MRTC

Legrand/Wiremold electrical systems conform to and should be properly
grounded in compliance with requirements of the current National
Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire hazard if improperly
installed or used. Legrand/Wiremold electrical products may bear the mark
of a Nationally Recognized Testing Laboratory and should be installed in
conformance with current local and/or the National Electrical Code.
Country of Origin: Made in U.S.
Table
Attach spine assembly to table using
four (4) #10-32 screws (included).

Snap covers to spine around cables.
Cover
Attach transition covers.
Transition Cover
Snap boot halves together around channel.

1 2
3 4