Whole Home Audio Table of Contents introduction Page RVP100-xx Single one Player Front and Back Pane Features Page d RUPERT-xx Single Zone Player Front and Back Panel Features Page $ HVP3100-xx Triple Zone Player Front and Back Panel Features. Pages RVP3S00-xx Triple Zone Player Front and Back Panel Features. Page? HVP300-5x Singe Zone Pr-Amplifier Front and Back Panel Features. Pages 1. Institutionalization 1.1 Network Requirements Page$ 1.2 Connecting the Gateway to the Network Page 1.
Whole Home Audio The Nuncio Wireless Audio System Product Manual Introduction Welcome to the exciting world of the Nuncio Player Portfolio Audio System. Naw your favorite music, In any room you want it, anytime you want ft, Is as close as the touch ofa button on any of your Apple or Andrei WI-Fi enabled portable devices.
UVo Whole Home Audio NVP100-xx Single Zone Player Front Panel Features (Wireless or Ethernet Connectivity) 1. Volume Down; Press to decrease audio volume. 2. Volume Up: Press to increase audio volume, 3. Mute: Press to mute fun-mate audio, 4, LED Indicator: Indicates status of NVP100-xx (see table In section 6.1 for details). NUPTIAL-xx Single Zone Player Back Panel Features (wireless or Theme Connectivity) 1.
OVO White Home Audio NYP200-xx Single Zone Player Front Pane! Features (Wireless or Ethernet Connectivity} 1. Volume Downy: Press to decrease audio volume, 2. Volume Up: Press to Increase audio volume, 3. Mute Press to mute fun-niute audio. 4, Bluetooth Press to cause the NYP200-xxte change to the next paired device In the ist. Press and hold to break any current connections, become discover able, and accept pairing requests. 5. LED Indicator: Indicates status of NVP200-xx (see table in section 6.
VE Whole Home Audio NVP3100-xx Triple Zone Player Front Patel Features (Ethernet Connectivity) Standby LED Indicator: [indicates whether the NVP3100-xls powered on, and whether it is In active or standby made, 2. Zone HEED Indicator: Indicates status of NVP3100-ncZone See table In section 6.1 for details]. 3, Zone LED Indicator: Indicates status of NVP3100 x Zone 2 {see table In section 6.1 for headstall. 4, Zone LED Indicator: Indicates status of NVP3100-0x Zone 3 {see table in section 6.1 for headstall.
Whole Home Audio NYP3500-ux Triple Zone Player Front Panel {Theme Connectivity—B&0 Willpower Amplification) So 1. Power Button: The Power button toggles the power on and off ta the NVP3500-1x component. Its also used in the reset procedure for each of the zones. 2. Setup Buttons: Each of the three zones bused in the a separate setup button used in the initial shyster setup process. These buttons are also used bn the zone reset procedure.
Whole Home Audio NYP300-xx Zone Player Front Panel Features (circles or Ethernet Connectivity} 1, Volume Down: Press to decrease audio volume, 2. Voltage Up: Press to Increase audio volume, 3. Mute: Press to audio. 4, LED Indicator: indicates status of KVP300 {sce tale in section 6.1 for details).
UO Whole Home Audio 1. Institutionalization 1.1 Network Requirements Alive Internet connection is necessary for complete setup, operation, and music enjoyment of your Nuncio Player Portfolio Audio System. Once the systems setup and run nine, Internet fs not necessary for listening to music streaming from 2 network source. For wired Ethernet connectivity a minimum 100mb wired network Is necessary for proper communication.
UVo Whole Home Audio Make sure that the installation's router Is connected to the network modem (this Is generally supplied by the Internet Service Provider, 1SF) with a silage CATS network cable.
UVo Whole Home Audi 1.4 Installing the NVP3100-xx and NVP3300-xx Zone Players if you are installing the NVP3100-xc or NVP3500-xx rack mount component, the network connection is completed by connecting ane of the NV 100-xx {or NVP3500-x) two Ethernet ports directly to tre home's network using a standard Ethernet cable. Either of the two Ethernet ports will communicate when connected, as shown in fig. 5.
Whole Home Audio 1.5 Connecting Speakers to the NVP100-xx and NVP200-xx The KVP 100-x¢ and NXP200-1x zone players are equipped with “5-way” binding posts for connecting the amplified audio signal to speakers. These can be bookshelf, floor standing, or installed in the wall o ceiling, 16 gauge speaker wire Is tormented for this purpose. The binding posts provide five different methods for terminating the wire. The post can be unscrewed to gasses a hole for the speaker wire.
UVo Whole Home Audio 2. Setting Up a System from the i0S or Android App Once you have connected the system to the local network you are ready to begin adding components in their desired locations, naming those locations for Jocasta control and creating your mufti-zone music system, The process s easily done from any iPad Touch, iPhone, iPad, or Android device using the Hugo Wireless Audio System app. 2.
OVO Whole Home Audio fig 13 The next step is fo place your first component in its desired location. When iris plugged in and powered on, the front LED fight will flash white virile the player is booting up, Whe it Is ready the front panel LEG will be solid green. Touch the “Next” button to proceed to the next step, as shown in fig, 13. Each player Is assigned a network 1D as well as a Neva System ID.
Fig. 17 While the connection is being made, the front panel LED will flash. The app will indicate when the connection Is complete and the LED bill be solid white. Touch “Next” to proceed, as . showing. 15. Choose a zone icon for the device, Then you use the "Edit Harte” Hutton to give the zone a customized name. When the selection Is complete, touch the “Done” button, as shown in fig. 16, ‘The “Add” button will repeat the setup process for the next zone.
Whole Home Audio 2.2 Adding Zane to an Existing System Once a system is setup, adding additional NVP100-xx, NVP200-xy, P3100, HVPI500-x4 ar NYF300-1x 20ne players Is easily done, Fig. 19 From this point the setup is identical fo the process covered In section 2,1, New System Setup. To do this, go tithe “Settings” button at the bottom of the Dashboard, which fs the section of the app defined by the Zane Icons, as shown in fig. 19. £lg.20 Touch the “Add a Nuncio Component” button as shown In fig, 20.
Voodoo Whose Home Audio 2.3 Adding Additional Gateways to an Existing System Upton two additional Gateways can be added to a system when additional WI-Firange is needed, Additional Gateways must be hardwired fo the network along with the notional Gateway, This can be done by plugging the new Gateway(s} into the first Gateway, Into the installations router, or a switch from the router. When anew Gateway is added tithe system, go to the Settings menu and defect “Add a Nuncio Component”, as show In fig. 21.
Housewife Home Audio 3. Using the i0S and Android Control App The 05 and Rolando apps offer complete system control tirelessly from any WI-Fi enabled phone or tablet. The 10 version & available for free download from the iTunes App Store and the Android version is available from Google Play. Both versions offer the same look and contra options. When used with tablets, the display is nicely baptized for a wie: of the complete system operation on one seen, 3.
Whole Home Audio 3.3 Bluetooth® Playback An important feature of the NYP200-xx Zane player is the ability to stream music content from any Bluetooth enabled device, To take advantage of Bluetooth streaming, rake sure that your device's Bluetooth is turned on. This is done within the device's settings. When in range of a NVP200-xx, the Nuncio zone wilt appear in your device's Bluetooth menu. Choose the zone to “pale” your device, as shown in fig.
Whole Home Audio When fine in device is connected to a zone, select “Ling In” from the app, as showman In fig, 36, The device will appear in the “Line In” menu and be available for selection fom all the zones, 3s shown fn fig. 37. A “Rename” uty is available by touching the snow button next to “Line Input”, this allows a specific same ta be given totting the app, as shown tnt figs. 38 and 39, Unwieldy SR Fa Fig. 38 3.5 Direct Stream Can AIRY Tp, A770.
ovo Whole Home Audio 4. The Settings Menu The Settings mend has several selections important to the system's control and operation. Access to Settings is made through the “Settings™ button located at the batter of the Dashboard.