Installation Instructions

Auto/Clamp
®
Eliminates separate cable clamps as well as the tools
usually needed for installation. To install the cable, insert
stripped or non-stripped nonmetallic wire into the
Auto/Clamp
®
opening and pull through to the desired length.
The cable is automatically secured and the installation is
complete. There are no other operations for the electrician
to perform. Contractors can look forward to saving time
and money with every Auto/Clamp
®
plastic box installation.
(One cable per Auto Clamp)
Quick/Entry
®
Speeds installation by eliminating needs for tools.
Another time-saving idea is Quick/Entry
®
, a method that
allows you to push stripped or unstripped nonmetallic cable
into a single plastic box without removing knock-outs.
Jagged edges usually formed in other boxes are
eliminated.
(Multiple cables per Quick-Entry)
Quick/Click
®
Fast, easy and secure installations. The unique, labor
saving Quick/Click
®
design secures the wiring device quickly
and easily. Simply push in the mounting screws with a
screwdriver and turn the screw one or two turns.
With Quick/Click
®
mounting, you cannot cross-thread or
strip a device mounting screw.
Stabilizer
In a 2 x 4 application, the stablizer leg rests against the interi-
or surface of the opposing wall virtually eliminating inward
movement of the box.
Metal
Remove the rear stabilizing bar from its shipping position and
insert the long end into the slot located underneath the dry-
wall stop. For applications with wood studs, break off small
section of stabilizing bar where marked before insertion.
Integral
P122B is optimally sized for Steel studs only. All others may
be used with both steel and wood with little or no deflection.
PLASTIC BOXES
INSTALLATION INSTRUCTIONS
Auto/Clamp
®
clamping action
Just push cable
in and pull to
proper length.
Proper mounting
position of
stabilizing bar.

Summary of content (4 pages)