Specification

CS3084 — Updated November 2020 — For latest specs visit www.legrand.us/wiremold
12
WIREMOLD
®
Plugmold
®
Multioutlet Systems
Base and Cover –
Base – V2400B .040" (1.0mm) steel.
Cover – V2400C .040" (1.0mm) steel.
Also available in custom colors.
Country of Origin: USA
V2400
V2410C Entrance End Fitting – Has 1/2"
and 3/4" trade size KOs on end
and bottom. Additional 1/2" trade
size KO on sides.
2400 Series Steel Raceway Fittings Ordering Information
2"
(51mm)
1 1/2"
(38mm)
1/2"
(12.7mm)
1 3/16"
(30mm)
1"
(25mm)
2 11/16"
(68mm)
1 7/8"
(48mm)
2 1/8"
(54mm)
1 29/32"
(48mm)
7/8"
(22.2mm)
Cross-Sectional Area:
1.39in
2
(897mm
2
)
ITEM CAT. NO. LENGTH MATERIAL
Base V2400B 5' (1.5m) .040 Steel
Base V2400B-10 10' (3.0m) .040 Steel
Cover V2400C 5' (1.5m) .025 Steel
Base & Cover V2400BC 5' (1.5m) .025 Steel
1 5/8"
(41mm)
CAT. NO. L W D GANG #
V2448 4 5/8" (117mm) 2 7/8" (73mm) 1 3/4" (44mm) 1
V2448-2 4 3/4" (121mm) 4 3/4" (121mm) 1 3/4" (44mm) 2
W
L
D
1 3/4"
(45mm)
1 29/32"
(49mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2"
(51mm)
1 5/8"
(41mm)
1 3/16"
(46mm)
15/16"
(23.8mm)
2 1/16"
(52mm)
3 7/8"
(98mm)
Coupling – For joining lengths of
raceway. Use with V2400 Series.
Country of Origin: USA
2401
Wire Clip – Holds conductors in
place in raceway.
Country of Origin: USA
2400WC
Cover Clip – For covering joint
where lengths of cover or base
adjoin. Use with V2400 Series
(nonmetallic).
Country of Origin: USA
V2406
Ground Clamp – No. 10 ground
screw provided. Use with V2400
Series Raceway.
Country of Origin: USA
2409
Entrance End – For connecting
V2400 with 1/2" trade size conduit
and armored cable. Use with
V2400 Series Raceway.
Country of Origin: USA
V2410A
Blank End – For closing open
end of V2400 Series Raceway.
Country of Origin: USA
V2410B
Country of Origin: USA
90º Flat Elbow – For right angle
turns on the same surface
(nonmetallic cover).
Country of Origin: USA
V2411M
Internal Elbow – For making
internal 90° corners. All steel
construction.
Country of Origin: USA
V2417M
External Elbow – For covering
outside corners (nonmetallic cover).
Country of Origin: USA
V2418M
Back Feed Fitting – For feeding
2400 Series Raceway from an
existing outlet box. Equipped with
1/2" trade size male bushing and
locknut washer for grounding.
Country of Origin: USA
V2451H
Device Box – Base has 1/2" trade
size KO and rectangular KO for
extension to wall box. Has #10
threaded hole for ground
connection. Cover has twistouts for
500/700 Series Raceway on each
end and twistouts for 2400 Series
Raceway on each side.
Country of Origin: USA
V2448
V2448-2