Specification

CS3084 — Updated November 2020 — For latest specs visit www.legrand.us/wiremold
13
WIREMOLD
®
Plugmold
®
Multioutlet Systems
2400 Series Steel Raceway Fittings Ordering Information
Country of Origin: USA
V2444
V2444-2
Extra Deep Device Box – Base
has rectangular knockout to
enable extension from existing
single-gang flush wall box and
1/2" and 1" concentric KOs.
Cover has twistouts for 500/700
Series Raceway on each end
and twistouts for 2400 Series
Raceway on each side.
Country of Origin: USA
V2427GT Duplex Receptacle – 3-wire, 20A,
125V, NEMA 5-20R. Provided with
10 1/2" (267mm) pigtails and inline
splice connectors.
2 3/4"
(70mm)
4 3/4"
(121mm)
4 3/4"
(121mm)
CAT. NO. L W D GANG #
V2444 4 5/8" (117mm) 2 7/8" (73mm) 1 3/4" (44mm) 1
V2444-2 4 3/4" (121mm) 4 3/4" (121mm) 1 3/4" (44mm) 2
5"
(127mm)
1 29/32"
(49mm)
1 9/16"
(40mm)
2 1/2"
(63mm)
3 5/8"
(92mm)
Country of Origin: USA
V2489 Side Reducing Connector –
For connecting V2400 Series
Raceway with V500 Series
Raceway.
Country of Origin: USA
624 2400 and 2400BD Raceway
& Cover Cutter – Portable
cutter for 2400B and 2400BD
Raceway and Cover. Tooled
steel construction for clean and
easy square cuts. Total manual
operation.
Country of Origin: USA
624BCK Replacement Blade Kit –
Replacement blades and die set for
624 Cutter.
Country of Origin: USA
V2427GA Duplex Receptacle – 3-wire, 15A,
125V, NEMA 5-15R. Provided with
10 1/2" (267mm) pigtails and inline
splice connectors.
Country of Origin: USA
2686FO FiberReady Transition Feed
Fitting – Eliminates offsetting
V2400 in connecting with surface
panel boxes. Has 3/4" and 1"
concentric trade size KOs with 1"
trade size KO elongated so
adjustment from surface to center
of bushing is 1" (25mm) minimum
to 1 5/8" (41mm) maximum. Has
twistouts for transition to Pancake
1500 and 2600 Series Raceway.
Country of Origin: USA
IG2427GA Isolated Ground Duplex
Receptacle – 3-wire, 15A, 125V
NEMA 5-15R. Provided with
10 1/2" (267mm) pigtails and
inline splice connectors.
Country of Origin: USA
IG2427GT Isolated Ground Duplex
Receptacle – 3-wire, 20A, 125V
NEMA 5-20R. Provided with
10 1/2" (267mm) pigtails and
inline splice connectors.
Country of Origin: USA
V2426 Lamp Holder – Medium base
lamp holder 660W, 250V. Black,
general purpose phenolic.