Specification

CS3084 — Updated November 2020 — For latest specs visit www.legrand.us/wiremold
7
WIREMOLD
®
Plugmold
®
Multioutlet Systems
2"
(51mm)
Plugmold 2000 Series Steel Multioutlet Systems Ordering Information
3/4"
(19.1mm)
* “V” prefix indicates Ivory ScuffCoat
™
finish, “BK” for Black ScuffCoat
™
finish, “G” prefix for Gray enamel finish,
“WH” for white enamel finish, and “S” for stainless steel.
2"
(51mm)
CATALOG WIRING OUTLETS (15A 120V NEMA 5-15SR) HOLE CUT COVER
NO. LENGTH CONFIG CENTER DISTANCE QUANTITY QUANTITY LENGTH HOUSING
Feet (meters) Inches (mm) Feet (m)
20GB12* 48' (14.63) GB 12" (305mm) 48 Single 8 6' (1.8m) Steel – Ivory, Gray
20GB18* 48' (14.63) GB 18" (457mm) 32 Single 8 6' (1.8m) Steel – Ivory, Gray
V20GB30 50' (15.25) GB 30" (760mm) 20 Single 10 5' (1.5m) Steel – Ivory
20GBA12* 48' (14.63) GBA 12" (305mm) 48 Single 8 6' (1.8m) Steel – Ivory, Gray
Plugmold 2000 Series Steel with Snapicoil Harness Ordering Information
UNIT OUTLETS CIRCUIT
CAT NO. LENGTH QUANTITY CORD SET LENGTH TYPE SWITCH BREAKER FINISH
20-C2* 3' 4" (1m) 6 Single 6' (1.8m) 12/3 SJT No Yes Steel – Gray, Ivory
Cord-Ended Plugmold 2000 Series Steel Ordering Information
* Use “V” prefix for Ivory ScuffCoat
™
finish and “G” prefix for Gray enamel finish.
1 5/16"
(33mm)
ITEM CAT NO. LENGTH MATERIAL
Base 2000B-5* 5' (1.5m) .040 Steel
Cover 2000C* 5' (1.5m) .025 Steel
Base & Cover 2000BC* 5' (1.5m) .025 Steel
1 9/32"
(33mm)
3/4"
(19.1mm)
Cross-Sectional Area:
0.80in
2
(516mm
2
)
NOTE: Not for use with
aluminum conductors.
* Available in Ivory ScuffCoat
™
finish (“V”) and Gray enamel finish (“G”).
2000* Base & Cover – Base – 2000B
.040" (1.0mm) steel. Cover – 2000C
.025" (.6mm) steel.
2000 Series Steel Raceway Fittings Ordering Information
2000WC Wire Clip – Holds conductors
in place in raceway.
Country of Origin: USA
V2003
2003
Supporting Clip – For temporary
support, while positioning lengths
of raceway base. Use with V/G
2000 Series. V2003 has ivory
finish, 2003 has plated finish.
Country of Origin: USA
W30
W30/W30G
Pressure-Type Wire Connectors–
W30 – For common connection of
two, three, or four No. 12 or No.14
solid copper conductors (White).
W30/W30G – For connection of
equipment grounding of 2, 3, or 4
solid conductors No. 14 or No. 12
AWG (Green). 300V maximum; 20A
105° C maximum.
2001 Coupling – For joining lengths
of 2000 Series Raceway Base.
BK2006*
G2006*
V2006*
WH2006*
S2006*
Cover Clip – For covering joint
where lengths of cover or base
adjoin. Use with 2000 Series.
Country of Origin: USA
Country of Origin: USA
Country of Origin: USA
Country of Origin: USA
1 7/32"
(31mm)
How 2009 is used.
2009 Ground Clamp – For connection
of equipment grounding conductor
to provide additional ground to
raceway. Use with 2000 Series
Raceway.
Country of Origin: USA