Specification

CS3084 — Updated November 2020 — For latest specs visit www.legrand.us/wiremold
8
WIREMOLD
®
Plugmold
®
Multioutlet Systems
2000 Series Steel Raceway Fittings Ordering Information
20017TC Internal Corner Coupling –
Furnished with one fiber bushing.
Country of Origin: USA
2 7/64"
(53mm)
1 29/32"
(47mm)
2 11/16"
(67mm)
3 22/64"
(94mm)
BK2010A3*
G2010A3*
V2010A3*
WH2010A3*
Entrance End – Offers larger
capacity than V2010A2. 1/2" trade
size KOs on end, each side and
bottom. 3/4" trade size KOs on
bottom and rear. Includes ground
screw. Use with 2000 Series.
Country of Origin: USA
2 7/8"
(73mm)
1 3/4"
(44mm)
4 5/8"
(117mm)
Cover gap filler snapped
into place in 2018C.
1 7/8"
(48mm)
1 1/2"
(38mm)
4"
(102mm)
6"
(152mm)
2017TC
2000B
2017TC used as
a corner coupling.
2017TC
2000B
2017TC used as a
corner coupling and a
straight-through fitting.
1 1/2"
(38mm)
1 1/2"
(38mm)
1 3/4"
(44mm)
4 3/4"
(121mm)
4 3/4"
(121mm)
2 1/2"
(64mm)
Ea. Leg
3/4"
(19.1mm)
Plugmold 2000
extended from wall
outlet using 2051H.
2051H fastened to
horizontally mounted
wall box.
4 1/2"
(114mm)
2051H fastened to
vertically mounted
wall box.
BK2010B*
G2010B*
V2010B*
WH2010B*
S2010B*
Blank End Fitting – For closing
the open end of raceway. Use with
2000 Series Raceway.
Country of Origin: USA
3"
(76mm)
1 9/32"
(58mm)
1 1/2"
(38mm)
2 1/8"
(54mm)
BK2010A2*
G2010A2*
V2010A2*
WH2010A2*
S2010A2*
Entrance End – For connecting
2000 Series Raceway with 1/2"
conduit and armored cable
connectors. 1/2" trade size KOs on
end, each side and bottom.
Includes ground screw. Use with
2000 Series Raceway.
Country of Origin: USA
BK2051H*
G2051H*
V2051H*
WH2051H*
S2051H*
Flush Plate Adapter – For feeding
2000 Series Raceway from an
existing wall outlet. Equipped with
1/2" (12.7mm) threaded stud,
toothed lockwasher for grounding,
and conduit bushing.
Country of Origin: USA
BK2011*
G2011*
V2011*
WH2011*
S2011*
90º Flat Elbow – For right angle
turns on same surface. Cover stop
permits neat butting of 2000C
Cover. Two couplings furnished.
Country of Origin: USA
* “V” prefix indicates Ivory ScuffCoat
™
finish, “BK” for Black ScuffCoat
™
finish, “G” prefix for Gray enamel finish,
“WH” for white enamel finish, and “S” for stainless steel.
BK2018C*
G2018C*
V2018C*
WH2018C*
S2018C*
External Elbow – To continue
raceway runs around outside
corner. Fills the gap when external
corner is made by notching and
bending the 2000B Base.
Country of Origin: USA
BK2015*
G2015*
V2015*
WH2015*
Tee – For branches at right
angles. Couplings furnished.
Country of Origin: USA
BK2048*
G2048*
V2048*
WH2048*
S2048*
Single Gang Device Box –
Cover has twistouts for 2000, 500,
and 700 Series Raceway. Base has
1/2" trade size KO and rectangular
KO for extension to wall box. Base
has #10 threaded hole for ground
connection.
Country of Origin: USA
V2048-2
G2048-2
Two-Gang Device Box – Cover
has twistouts for 2000, 500, and
700 Series Raceway. Base has
1/2" trade size KO and rectangular
KO for extension to wall box. Base
has #10 threaded hole for ground
connection.
Country of Origin: USA