Instruction Manual

WWW.LEGRAND.US/WATTSTOPPER
3
WATTSTOPPER®
WIRING
Breakaway
tab
Optional neutral
terminals behind
breakaway tab
8" flying leads for
line, load, ground
and multi-way
connections
Black
Red
Green
Yellow
Purple
Pink
Simple optional neutral connection allows installation in any 2-wire or
3-wire application. When used in a multi-way application, all devices in
that space must be wired using the same method of either with neutral
or without neutral.
Driver
or Ballast
Red
Black
Neutral
Line
Green
Neutral
(optional)
Ground
Purple
Yellow
Pink
0 a 10V
Dimming
Multi-way Wiring (up to 4 sensors)
Black
Purple
Black
Neutral
Neutral
(optional)
Line
Neutral
(optional)
Ground
Green
Ground
Green
Yellow
traveler
Yellow
Red
Pink
Red
Purple
Pink
Connect 0-10V
leads to dimming
ballast from one
PW-311-347 only
Driver
or Ballast
Note: For multi-way wiring, All units should be on the same phase
PW-311
PW-311-347
Multi-way Wiring (up to 4 sensors)
Driver
or Ballast
Red
Black
Neutral
Line
Green
Signal
(Blue w/
White
Stripe)
Ground
Purple
Yellow
Pink
0 a 10V
Dimming
Black
Purple
Black
Neutral
Signal
(Blue w/
White
Stripe)
Line
Signal
(Blue w/
White
Stripe)
Ground
Green
Ground
Green
Yellow
traveler
Yellow
Red
Pink
Red
Purple
Pink
Connect 0-10V
leads to dimming
ballast from one
PW-311 only
Driver
or Ballast
Signal wire connects to neutral. Signal wire can
connect to ground in replacement or retrofit
application
NOTE: Per UL, the 0-10V negative dimming wire color has been changed
from gray to pink.