GUIDE SPECIFICATIONS This guide specification is written according to the Construction Specifications Institute (CSI) formats, including MasterFormat, SectionFormat, and PageFormat. Carefully review and edit this section to meet the requirements of the project and local building code. Coordinate this section with other specification sections and drawings. Delete all "Specifier Notes" when done editing this section. SECTION 16140 WIRING DEVICES PART 1 - GENERAL 1.1 A. 1.
GUIDE SPECIFICATIONS 1. B. Underwriters Laboratories Inc. (UL): 1. 1.5 CSA C22.2 No. 42-2010 (R2015) - General Use Receptacles, Attachment Plugs, and Similar Wiring Devices. CSA C22.2 No. 111-2010 (R2015) - General-Use Snap Switches. CSA C22.2 No. 223-2015 - Power Supplies With Extra-Low Voltage Class 2 Outputs. UL 20 - Standard for General-Use Snap Switches. UL 498 - Standard for Attachment Plugs and Receptacles. UL 514D - Standard for Cover Plates for Flush-Mounting Devices.
GUIDE SPECIFICATIONS B. 2.2 Substitutions will be considered under provisions of Section 01635. STRAIGHT BLADE DUPLEX RECEPTACLES Specifier Note: Retain as many of the following products as required for a specific project and delete the others. A. Straight Blade Duplex Receptacles: 1. General: Receptacles comply with UL 498 and CSA C22.2 No. 42. Specifier Note: Retain one color and delete the others in brackets after Part No. and from description. Duplex Receptacles: radiant® Part No.
GUIDE SPECIFICATIONS resistant thermoplastic construction; automatic ground clip; extra-long mounting strap; Quickloop wire looping aid; tri-drive screws; side-access push wire release; side wire accepts #12 - #14 AWG solid, push wire accepts #14 AWG solid only; [light almond] [ivory] [white] [brown] color. E. 20A Straight Blade Tamper-Resistant Duplex Receptacles: 1. General: Receptacles comply with UL 498 and CSA C22.2 No. 42. Meets NEC® Tamper-Resistant requirements. UL listed; CSA compliant.
GUIDE SPECIFICATIONS three seconds to insure that ground fault protection is active; auto-ground clip; audible alarm; [light almond] [ivory] [white] [brown] [black] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description. 15A Specification Grade Self-Test Combination Tamper-Resistant Switch/GFCI Duplex Receptacles (No Federal Specification): Part No.
GUIDE SPECIFICATIONS terminals accept #14 - #10 AWG solid or stranded copper or copper-clad conductors; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; auto-ground clip; indicator light; [light almond] [ivory] [white] [brown] [black] [gray] [red] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description.
GUIDE SPECIFICATIONS terminals accept #14 - #10 AWG solid or stranded copper or copper-clad conductors; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; auto-ground clip; indicator light; [light almond] [ivory] [white] [brown] [black] [gray] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description.
GUIDE SPECIFICATIONS test/reset buttons; thermoplastic tamper-resistant shutter; terminals accept #14 #10 AWG solid or stranded copper or copper-clad conductors; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; auto-ground clip; indicator light; [light almond] [ivory] [white] [brown] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description.
GUIDE SPECIFICATIONS an automatic test every three seconds to insure that ground fault protection is active; indicator light; auto-ground clip; [light almond] [ivory] [white] [brown] [black] [gray] [red] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description. 20A PlugTail® Specification Grade Self-Test Tamper-Resistant GFCI Duplex Receptacles: Part No.
GUIDE SPECIFICATIONS 20 amps, 125 volts; nylon face, body, and test/reset buttons; thermoplastic tamper-resistant shutter; PlugTail® right angle connector with six (6) inch #12 AWG THHN stripped, solid or stranded, copper leads; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; auto-ground clip; [light almond] [ivory] [white] color. RoHS Compliant.
GUIDE SPECIFICATIONS face, body, and test/reset buttons; thermoplastic tamper-resistant shutter; terminals accept #14 - #10 AWG solid or stranded copper or copper-clad conductors; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; auto-ground clip; indicator light; [light almond] [ivory] [white] [brown] [black] [gray] [red] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No.
GUIDE SPECIFICATIONS copper-clad conductors; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; auto-ground clip; indicator light; [light almond] [ivory] [white] [gray] [red] [orange] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description. 15A Hospital Grade Self-Test Combination Tamper-Resistant Night Light/GFCI Duplex Receptacles: Part No.
GUIDE SPECIFICATIONS terminals accept #14 - #10 AWG solid or stranded copper or copper-clad conductors; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; auto-ground clip; [light almond] [ivory] [white] [red] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description. 20A NAFTA-Compliant Hospital Grade Self-Test GFCI Duplex Receptacles: Part No.
GUIDE SPECIFICATIONS resistant shutter; PlugTail® right angle connector with six (6) inch #12 AWG THHN stripped, solid or stranded, copper leads; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; indicator light; auto-ground clip; [light almond] [ivory] [white] [black] [gray] [red] color. RoHS Compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description.
GUIDE SPECIFICATIONS rated 20 amps, 125 volts; nylon face, body, and test/reset buttons; thermoplastic tamper-resistant shutter; PlugTail® right angle connector with six (6) inch #12 AWG THHN stripped, solid or stranded, copper leads; SafeLock® Protection performs an automatic test every three seconds to insure that ground fault protection is active; auto-ground clip; indicator light; Lexan® nightlight lens; ivory color. RoHS Compliant. 2.
GUIDE SPECIFICATIONS 2. 2.5 Duplex USB Charging Receptacles: radiant® Part No. WRR26USBAC6[LA][I][W][BK][NI]CC6; rated 15 amps, 125 volts AC, NEMA Configuration 5-15R; charges two devices simultaneously while still using receptacles; compatible with USB 2.0 and 3.0 devices; 6.0 amps total charging capacity; tamper-resistant receptacles with patented dual mechanical shutter system with black "invisi-shutters" helps prevent insertion of foreign objects and meets NEC requirements for tamper-resistance.
GUIDE SPECIFICATIONS a. C. Snap-In Light Module: radiant® Part No. RCDLM locator light module snaps-in for easy installation; rated 15 amps, 120/125 VAC; lights when OFF; uses energy-efficient LED light; LED light will not generate heat and will last, on average, 47 years. Two Single Pole Switches and Single Pole/3-Way Switch: 1. General: Switches comply with UL 20. Switches are cULus listed. Specifier Note: Retain one or more colors and delete the others in brackets after Part No.
GUIDE SPECIFICATIONS Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description. A. 2.7 Four-Button Timer Switches: radiant® Part No.
GUIDE SPECIFICATIONS 15A, Three-Way Illuminated Self-Grounding Switches (Lighted When Off): radiant® Part No.
GUIDE SPECIFICATIONS A. Tru-Universal Dimmer Incandescent, Halogen, ELV, MLV, LED, CFL, EFL: radiant® Part No.
GUIDE SPECIFICATIONS 1. General: Comply with UL 1472; cULus listed and CSA compliant. Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description. Single Pole/3-Way Incandescent Dimmers: radiant® Part No.
GUIDE SPECIFICATIONS Single Pole/3-Way Fluorescent Dimmers: radiant® Part No.
GUIDE SPECIFICATIONS 120V Single-Pole Occupancy Sensor: radiant® Part No. RRW600UTC; singlepole, two-wire occupancy sensor; rated 0-600W, 120 VAC, 60 Hz; tri-color (ivory, white, and light almond) color; lighted switch for visibility in darkened rooms; automatic-ON, manual-ON, and selectable auto/manual ON; 30 seconds-30 minutes time delay; neutral not required; low-profile styling with uniform colormatched lens and device; works with most common residential lighting types; UL Listed. 2.10 A.
GUIDE SPECIFICATIONS Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and from description. Full Night Lights: radiant® Part No. NTLFULL[TCCC6][WCC6]; rated 120/125 volts AC; hidden sensor automatically controls night light; five adjustable light settings, including OFF; back and side wire terminals accommodate #12 AWG and #14 AWG stranded and solid copper wire; push wire terminals accommodate #14 AWG; tri-color: [light almond] [ivory] [black]; [white] only. 2.
GUIDE SPECIFICATIONS E. Three-Gang Screwless Wall Plate: radiant® Part No. RWP263[W][I][LA][BK][GRY][NICC6][DBCC6]; [Brown] [White] [Ivory] [Light Almond] [Black] [Gray] [Nickel] [Dark Bronze] finish and color. F. Four-Gang Screwless Wall Plate: radiant® Part No. RWP264[W][I][LA][BK][GRY][NICC6][DBCC6]; [Brown] [White] [Ivory] [Light Almond] [Black] [Gray] [Nickel] [Dark Bronze] finish and color. G. Five-Gang Screwless Wall Plate: radiant® Part No.
