FAQ

• Enter the Legrand account details used to log into the Home + Control app, then select “Connect.” After
synchronizing, the list of adorne and/or radiant products set up within the Legrand Home + Control app should be
displayed.
• Select the pen icon to assign each connected product to a specific room. You can select a room from the provided
list or create a new one with a customized name. This is how your products will be recognized by the Google
Assistant for voice control.
• Repeat the previous step until all the connected products in your adorne and/or radiant with Netatmo solution are
assigned to a room. Your Google Assistant is now configured.
How can I control my adorne and/or radiant with Netatmo products using voice control with Google Assistant?
Using Google Assistant for voice command of adorne and radiant with Netatmo requires the use of specific words and
phrases. Below is a non-exhaustive list of compatible commands for controlling your connected switches, dimmers and
outlets:
“Ok Google, turn on entry light.”
“Ok Google, turn off kitchen.”
“Ok Google, turn on ALL the lights”.
“Ok Google, brighten the bathroom light.”
“Ok Google, set kitchen to 70%.”
“Ok Google, turn on coffee maker.”
“Ok Google, turn off table lamp.”
“Ok Google, activate Away.”
“Ok Google, activate Sleep.”
Please note these commands are shown for example purposes. Connected devices, rooms/groups and available scenes will
vary. For more information on using Google-friendly commands, we recommend you visit Google’s support site. (LINK
https://support.google.com/assistant)
Can I control several radiant/adorne with Netatmo installations with my Google Assistant?
If you have multiple solutions made up of adorne and/or radiant with Netatmo products (ex. a second solution installed at a
summer home, etc.) that are paired to the same Legrand user account, ALL connected switches, dimmers and outlets will
be accessible via Google without the voice assistant distinguishing between the individual solutions. If you want to
individually control only one of multiple adorne and/or radiant with Netatmo solutions via Google Assistant, you need to
use a Legrand user account when pairing with the Google Assistant app that is linked ONLY to that individual solution. To do
this from the Legrand Home + Control App, you need to:
• Create a new Legrand account under Settings using a different email address. Then, share the solution you want
Google to control with the new account. See FAQ “How can I share access to a solution with other users?” for
additional details.
OR
• Remove access to any other solutions paired to the existing account so that only the solution you want Google to
access/control remains. To do this, select the solution(s) you wish to remove and then select “Guest
Management.” From there you can delete the account via the paired email address.
Can I use my personalized Wake up/Sleep/Home/Away scenarios in the Home + Control App with Google Assistant?
Yes, your custom Home/Away or Wake/Sleep scenes should be immediately accessible through the Google Assistant app
and there is no need to set them up again. For example, you just have to say, “Okay Google, activate sleep,” and all the
lights specified in your custom scene will turn off.