Smart Plug-In Switch, Wi-Fi
before you start Review this guide in its entirety. Consult an electrician with any questions or if you are unsure of your abilities. Caution: To reduce the risk of injury and/or overheating and damage to other equipment: • For dry, indoor use only. • Connect the Smart Plug-In Switch to a 120 VAC, 60 Hz power source ONLY. • To reduce the risk of electrical shock, this equipment has a grounding type plug that has a third (grounding) pin.
installation & setup 1|p lug in the smart plug-in switch Insert the lamp or device to be controlled into the outlet on the Smart Plug-In Switch.
2 | test the smart plug-in switch ith the lamp or device on, press the button on the Legrand Smart Plug-In a W Switch to turn your device on. b Press the button to turn your device off. TROUBLESHOOTING TIP: If the device is not responding to the switch, confirm that the outlet is powered and that the device is functional.
3 | set up your system a Download and launch the Smart Lights, Wi-Fi app by Legrand. The app is available on the App Store or on Google Play. SCAN TO DOWNLOAD b Connect your Smart Plug-In Switch to your home network by following the step by step instructions in the app. c Use the app to control your Smart Plug-In Switch. SCAN TO WATCH HOW TO SET UP THE APP Google Play and the Google Play logo are trademarks of Google LLC. App Store is a service mark of Apple Inc., registered in the U.S.
getting to know your plug-in Item Name Description • Turns the device on or off. 1 Button • To return the switch to factory default, press and hold the button for 30 seconds. 2 LED Locator Light 3 Outlet • Indicates the current state of the device. Refer to “LED Locator Light Explanations” for detail. • Plug your lamp or device into the socket. LED LOCATOR LIGHT EXPLANATIONS LED State of Light Color Explanation Blinking Amber Factory default; ready to connect to your network.
specifications Load Rating Resistive Incandescent/halogen Ballast LED Motor 120 VAC, 60 Hz,15 A 1800 W 15 A standard/electronic 5A 1/2 HP Legrand reserves the right to change specifications without notice.
regulatory information FCC NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the transmitter’s radiating structure(s) and the body of the user or nearby persons. NOTE: Any changes or modifications to this device that are not expressly approved by the manufacturer will void the warranty and the user’s authority to operate the equipment.
warranty This product is warranted under normal use against defects in workmanship and materials for as long as you own it. If the product fails due to a manufacturing defect during normal use, return it for a replacement at the store where purchased or contact technical support at 1-877-833-3303. A dated sales receipt must be provided for all replacement requests (legible copies are acceptable). Additional warranty details are available at http://www.legrand.us under your device’s product page.
questions? we're here to help PHONE: 1-877-833-3303 8:00 a.m. to 8:00 p.m. EST (M-F) EMAIL: smartlighting@legrand.us CHAT: https://www.legrand.us/radiant/smart-lighting.
©2019 Legrand All Rights Reserved IS3033 09/19 341267 Legrand, North America 50 Boyd Avenue Syracuse, NY 13209 1-877-833-3303 www.legrand.
