User Manual

Table Of Contents

Instructions for Use, V 1.5 RevD – 03/2013

4. Initial Operation

Fig. 5

• Movetheinstrumenttoitsfinalsetuplocation.

Active carbon filter

• Unpacktheactivecarbonfilter(13) and insert

it (see Fig. 5).

When doing so, make sure that the filter is

inserted with the correct side up. Note the

direction of the

label (29) on the

front of the filter –

the arrow must be

pointing upwards.

4.3 Installing accessories

Remote fill / drain hose

• Connectthesuppliedremotefill/drainhoseto

the remote drain connection on the front of the

instrument (refer Fig. 6).

• Important!

When inserting the hose into the drain opening

(Fig. 5/6, 18), the connecting device (28) of the

hose must engage with a clearly audible click.

Fig. 6

If it is possible to set up the bulk con-

tainer for filling and draining in the

immediate vicinity of the instrument,

the hose can be shortened so that it is

easier to handle.

When shortening the hose, you can cut

a V-shaped notch into the hose end to

attain better flow.