Instruction Manual

16
Instructions for use V 1.5 – 10/2012
4.4 Handwheel assembly
• Insert the pin (1) of the handwheel shaft in to
the hole (2) of the handwheel.
• Mount the spring washer (3) on the screw (4)
as shown in Fig. 16.
• Tighten the screw (4) with an Allen key (5 mm).
• Attach the cover disc (5) (self-adhesive).
To dismount, proceed in reverse order.
The handwheel including the fixing components are packed in the
cardboard box for the accessories. The handwheel can be dis-
mounted for transporting (e.g. narrow doors).
Only rotate the handwheel when the refrigeration system is on
and the cryochamber is cold.
Fig. 5
4. Unpacking and installation
3
4
5
2
1