Manual

Instructions for Use V 2.9 RevC, English – 12/2013

4. Initial Operation

4.1 Unpacking instructions

Fig. 10

• Toremove the metal strips (1), you need metal

shears and suitable gloves. Stand next to the

crate and cut the strips at the location shown (see

Fig 10a "" above).

• Liftthelid(2) off of the crate.

• RemovetheInstructionsforUse(3) and packing

list.

• Removeallaccessories(4) from the compartments

of the cardboard grid (5).

• Whenallpartshavebeenremoved,liftthemup-

wards and out and remove the intermediate bottom

(6) underneath.

• Lifttheoutercartonring(7) upwards and out.



Fig. 10a

Caution when removing the metal strips!

There is a risk of injury when opening them

(the strip has sharp edges and is under

tension)!

When the instrument arrives, check the tilt indicator (Fig. 10) on the package. If the

arrowhead is blue, the shipment was transported laying flat, was tilted at too great

an angle or fell over during transport.

Note this on the shipping documents and check the shipment for possible damage.

If obviously there is damage, please contact your freight forwarder immediately.