Manual
32
Instructions for Use V 2.9 RevC, English – 12/2013
4. Initial Operation
4.3.3 Connecting the power cable
2
3
230
Fig. 16
• Beforeconnectingthepowercable,checkif
the power switch (2) at the rear of the instru-
ment is disconnected ("O").
• Outoftheselectionofcables,selecttheone
with the plug that fits into your laboratory's
wall outlets.
• Connectthepowercabletothecorresponding
socket (8) at the rear of the instrument and plug
the power cable into the wall outlet.
The instrument is ready to be switched on.
The instrument is supplied together with various country-specific power cables.
The instrument may only be connected to the power with the cable supplied together with the
instrument and it may only be connected to grounded sockets.