Manual

33
Leica TP1020
4. Instrument Setup
4.5 Setting the time
4.4 Switching on the instrument
• Turnontheinstrumentwiththepowerswitch
on the right side at the rear of the instrument.
The instrument does a startup run.
Next, the instrument name and software version
(e.g. V 1.00) are displayed.
This reading disappears after about 10 seconds.
Next, the number of the processing station where
the basket holder is located and the real time
indication are displayed.
• Press"CLOCK".
The cursor blinks at the hour indication.
• Toadjust the hours, press PLUSorMINUS
respectively.
• PressARROWRIGHT.
The cursor jumps to the minute indication.
• Toadjusttheminutes,pressPLUSorMINUS
respectively.
• TofinishsettingthetimepressCLOCKagain.
0 1
8