Manual

Instructions for Use V 2.9 RevC, English – 12/2013

6. Programming the Instrument

6.2.7 Displaying total program duration

Once a program is set up, total run time can be

displayed.

• PressCLOCKtodisplaythetotalruntimeof

the program.

The total duration displayed here is 1 day, 0 hours

and 12 minutes.

• Toquit the displayindication,press CLOCK

again.

6.2.8 Leaving the programming mode

To end programming you have to leave the

programming mode.

• PressPROGtoquitprogramming.

While you are in the programming mode, you cannot start a program. Prior to starting a program,

you must quit the programming mode.

Warning! Use caution when handling solvents! Make sure the premises are adequately venti-

lated! Explosion hazard!

Always observe worker's protection rules and use adequate protective gear (gloves, laboratory

coats).

While operating the instrument, no liquid may enter in contact with any of the electrical con-

nections or the interior of the instrument.

To remove and reinstall the reagent containers and wax baths, the instrument can be rotated

thus ensuring easy access to all stations at any time.