Manual

Leica TP1020

9. Operating the Instrument in the Automatic Processing Mode

9.1 Starting a program

9.1.1 Immediate start

• Tostartaprogram,pressSTART.

• Selectthedesiredprogramnumberbypress-

ing PLUS or MINUS.

• Tostart the selected program immediately,

press START again.

A program can either be started immediately

or at a later point in time using the delay function.

All corresponding parameters are displayed, such as number of baskets, starting position (sta-

tion number), vacuum on/off, and infiltration time of the basket in the starting container. There-

fore, check the parameters on display and decide if you actually wish to start the displayed

program. Otherwise select another program.

The cursor blinks at the program number data entry position. For a program to be selectable for

use, at least one infiltration time for one processing station must have been set.